More convertible problems
07-25-2013, 04:41 AM
#1
Registered User
Thread Starter
Join Date: Jul 2013
Location: Glenwood, Iowa
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
More convertible problems
My '04 350Z has a problem with the drivers window. Initially, it wouldnt go back up. I tore it apart and found the motor was working and the regulator was operating without binding, so I greased it up and put it back together. Now the window goes up.
The problem now is, when the window hits the top, it bumps it right back down again. I can nudge it back up by hitting the button several times but its not working right. Now the top wont go down at all.
My question is: Does the motor need to be centered in its movement? Is there an internal clutch on the motor assembly? And it sure would be helpful to have a wiring diagram for the convertible top operation. There must be several microswitches that need to work together. Can someone help me out please? Thanks, Scott
The problem now is, when the window hits the top, it bumps it right back down again. I can nudge it back up by hitting the button several times but its not working right. Now the top wont go down at all.
My question is: Does the motor need to be centered in its movement? Is there an internal clutch on the motor assembly? And it sure would be helpful to have a wiring diagram for the convertible top operation. There must be several microswitches that need to work together. Can someone help me out please? Thanks, Scott
07-25-2013, 07:04 AM
#2
Registered User
Join Date: Apr 2012
Location: Gardner, KS
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Last edited by ProChargedZR; 07-25-2013 at 07:06 AM. Reason: Updated link
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
08-06-2021 06:19 AM