Notices
Audio & Video 350Z Mobile entertainment and other electronics

Help

Thread Tools
 
Search this Thread
 
Old Jul 25, 2006 | 09:26 PM
  #1  
WackBlackZ's Avatar
WackBlackZ
Thread Starter
Registered User
 
Joined: Feb 2006
Posts: 8
Likes: 0
From: New ORleans
Default Help

I changed out my radio and now my brake light, low tire pressure light are on and my gas guage doesn't work. I disconnected my guages. Any help?
Reply
Old Jul 26, 2006 | 05:18 AM
  #2  
WackBlackZ's Avatar
WackBlackZ
Thread Starter
Registered User
 
Joined: Feb 2006
Posts: 8
Likes: 0
From: New ORleans
Default

bump
Reply
Old Jul 26, 2006 | 05:24 AM
  #3  
NewJerZ's Avatar
NewJerZ
Registered User
iTrader: (1)
 
Joined: Jul 2006
Posts: 577
Likes: 0
From: NJ
Default

I see a Nissan dealer in your immediate future

Reply
Old Jul 26, 2006 | 08:29 AM
  #4  
WackBlackZ's Avatar
WackBlackZ
Thread Starter
Registered User
 
Joined: Feb 2006
Posts: 8
Likes: 0
From: New ORleans
Default

actually all my gauges light up but my speed and rpm and gas don't work. The digital gauge in the center lights up but doesn't work at all and the low pressure lightand brake light are still on.
Reply
Old Jul 26, 2006 | 09:51 AM
  #5  
702Fairlady's Avatar
702Fairlady
Registered User
iTrader: (5)
 
Joined: May 2006
Posts: 715
Likes: 0
From: Las Vegas, Nevada
Default

Dang.. I have no idea how you managed to mess up the gauges with a radio. I dont know if maybe a fuse might have burnt out causing some problems. Burnt out fuses is one of the most common issues after a head unit install. The only thing I can think of at the moment is to check the fuses... Or if you ahve a Nissan dealer around head on over there.
Reply
Old Jul 26, 2006 | 09:57 AM
  #6  
Sexy350zStud03's Avatar
Sexy350zStud03
Registered User
 
Joined: Apr 2005
Posts: 233
Likes: 0
From: St. Louis M)
Default

did you remember to reconnect the plug right behind the center console at that top where the 3 gauges are. Just so you know if you do disconnect that you wont add any miles to the tach but your speedometer wont work.
Reply




All times are GMT -8. The time now is 11:39 AM.