I have a 2007 with Bose system and Navi. The stealthbox is the v2 version from JL which has 10W3v3's instead of 10W3v2's. The box has already been installed in the car but the amplifier hasn't. I also have the remote bass controller that I'll be putting somewhere.

For amp mounting location i think i will put it where the stock sub is at because i want to keep the glove box usable in case i need to store something.

For sound extraction I will be pulling the audio signal from the subwoofer amp Inputs directly into spliced RCA's (Slash amps have hi-level input directly built-in)

For the remote lead I don't know where to get it from so I need to find that out. For the power I think I will need to run the wire down the passenger side of the car since the battery is on the passenger side.


I leave you with a couple of pictures of the car. These were taken at a photography studio that was taking pictures of the stealthbox for the JL Audio catalog/website.







Any help or direction you guys can give me I'd appreciate it. Thanks!

 

i am in Delray

5 minutes North of you

i have a full 2 bay shop at my house

if you want my assistance i would be happy to install or assist you

PM if you have any interest

Best Regards
Travis 350zspl


or call me at work Monday
800-777-8665 ext 2242
8-5 eatsern

 

awesome Travis.

I will get all the wiring needed and the fuse block for the install and give you a call.

 

i stock sound quest , & stinger
wire, fuses, interconnects, distribution blocks , & fuse holders

feel free to get from me , or source yourself

let me know it would be my pleasure

 

So you don't me to help you? I see how it is

 

haha hey you BOY toucher. thanks for the phone tips, i ran the remote, speaker wires and the ground. drew up the amp rack and will get it built tomorrow at work. Took off the passenger seat completely and have the routing for the power wire all laid out.

tis gonna be nice.

 

You suck at the LyF3

 

btw seems one of the studs on the stealthbox is dislodged from the fiberglass. idk.... i dont think i can do anything about it since i got it for free.99 LAWL

 

I broke one of mine too trying to hulk smash it in to the hole in the sheet metal, so I stuff the hole in the stealthbox with some rubbery type speaker sealant I found around the shop, you can probably find it at work.

 

oh so you just sealed the hole and didnt put the stud back in. so the box is attached by one stud only. I guess that will work.

I need a little more specific description on this type of foam since there's like 10 million kinds of that at work. Is it open cell or closed cell? what color? is it liquid?

 

jes.
You know the stuff that comes with new OEM sentra taillights to seal them against the car's body? THAT stuff. Think of a 1/4" round rubbery solid tube that can be pressed or used to seal stuff and is kinda sticky.

 

oh okay that goop type of shiite. yeah i can get that tons of it. I'll probably have the peasants in the shop do it for me RAUL.

 

Excellent

 

you know how i roll. yo.

where's nikki. i want the cawnt shawts asap or ban.

 

PM sent to her with a link to this

 

Oh mai God. What teh fawk.

I gotz cawnt shots 4 joo.

 

dear god...they let anyone in this site! They should start having background checks or something

welcum toe knee!

 

Fez for site admin

 

ill drink you under the table ANY DAY DAWG. ALL DAY EVERY DAY!

 

your pokemons. show me them.