pioneer 3300BT + crutchfield rca harness = no audio?
05-01-2011, 03:04 PM
#1
Registered User
Thread Starter
pioneer 3300BT + crutchfield rca harness = no audio?
i just got done installing the unit, and i used the crutchfield wiring harness with the low level rca plugins, but there's no audio coming out of the speakers... can't quite figure out what i did wrong.
the only thing that i can think is that the wires coming out of the pioneer harness that would normally go to the speakers, do i need to do anything with them? i taped them off because i thought that with the rca inputs, those wires would be bypassed.
it's an 05 with bose/nav. any help would be appreciated.
UPDATE: i fixed the problem, the lead that powers the amp wasn't secured properly. it had come loose when i was trying to put it back into the dash. once i redid the connection, everything works like a charm. pics to follow soon
the only thing that i can think is that the wires coming out of the pioneer harness that would normally go to the speakers, do i need to do anything with them? i taped them off because i thought that with the rca inputs, those wires would be bypassed.
it's an 05 with bose/nav. any help would be appreciated.
UPDATE: i fixed the problem, the lead that powers the amp wasn't secured properly. it had come loose when i was trying to put it back into the dash. once i redid the connection, everything works like a charm. pics to follow soon
Last edited by Colonel Sanders; 05-01-2011 at 03:45 PM.
10-13-2011, 10:52 AM
#3
Banned
iTrader: (2)
Join Date: Jul 2010
Location: New Jersey
Posts: 491
Likes: 0
Received 0 Likes
on
0 Posts
Having the same problem here. Which wires were loose that you needed to fix and where did you plug your RCA wires to? Front and rear output? On the pioneer harness.
Thanks
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
