SHINE: Z33 Spec-V Lip Kit (Vertex Replica)
07-25-2007 | 01:02 PM
#1
Thread Starter
Sponsor
Shine Auto Project
Shine Auto Project
iTrader: (25)
Joined: Oct 2005
Posts: 416
Likes: 0
From: Rancho Cucamonga
SHINE: Z33 Spec-V Lip Kit (Vertex Replica)
Topic: Shine's replica of the Vertex Lip kit.
Parts Available:
Front Lip $250
Sidesteps/Sideskirts $275
Rear Half Bumper (attaches to OEM rear bumper) $265
Total $795
Shipping:
Shipping for 1 Front Lip will be $65 to the lower 48 states.
Shipping for 1 pair of sideskirts will be $65 to the lower 48 states.
Shipping for a Rear Half Bumper will be $125 to the lower 48 states.
Combined shipping:
1 pair of sideskirts + Rear half bumper .... $125 to the lower 48 states.
Shipping for the full aero lip kit is $125 to the lower 48 states.
We do in fact ship to Hawaii & Puerto Rico as well as ship internationally, so please PM me with your Country and Postal Code if you are seriously interested in a rate quote. I say "seriously" because we do have to call around for the best rates, which do take quite a bit of time. However, we do understand that international shipping is costly and if it is beyond your budget, that is perfectly fine .
*The only way to save on international shipments is to combine shipping with fellow enthusiasts around your area who might be interested in our products. The weight of the package does not matter nearly as much as the size of the box. If we can stuff two more aero kits in a box, why not ?
This is one of the first aero kits we offered to the Z community and there is a good chance we're thinking about discontinuing is depending on the demand.
Picture Time!
Our Version:
These are pictures taken by our customers so if they're dark, you know who to blame
.
About Our Products:
Most of our products, including the full Amuse replica aero kit, are made from a material we call Hybrid FRP. FRP stands for Fiber Reinforced Plastic and another well known term for it is "fiberglass." So yes, FRP is simply a more fancy term for fiberglass. Please do not differentiate the two because body kit manufacturers will more than likely tell you their product is made from "FRP" hoping the consumer thinks it's something more advanced than fiberglass.
Fiberglass is generally hard and brittle. Some parts are light and some parts are heavy. It all depends on the skill level of the person making the product; light is better. Hard and brittle are definitely not characteristics you would want in an aero kit which is most likely going to hit something on the ground through the course of daily driving. Something hard and brittle tends to crack easily.
Our parts are flexible fiberglass and we decided to give it the name Hybrid FRP simply because the materials used are not conventional in fiberglass parts. The materials are exclusively formulated by our company to get the results we want. Our new products have a specially formulate surface coat, which is a flexible primer, which is easier to sand than gel coat (found in most FRP aero parts) and also adheres better to primer and paint. Careful selection of fabrics and resins used ensure that we offer a unique product our competitors claim to have and only wish they had.
Painting our Aero Parts:
The same process is used to paint our parts as it is to paint general FRP aftermarket aero parts. However, we have a recommended process that uses a combination of flexible primer and flexible clear coat. More info can be found here.
http://www.rx7club.com/showthread.php?t=628233
Return Policy
If you are unsatisfied with our aero products, you can return them for a full refund. No restocking fee. However, items must be returned in the condition it was sent within 14 days of receiving the product. We are open and fair with our customers as long as our customers are open and fair with us.
Please let me know if you guys have any further questions.
Ken Ching
CEO, Shine Auto Project Inc.
Parts Available:
Front Lip $250
Sidesteps/Sideskirts $275
Rear Half Bumper (attaches to OEM rear bumper) $265
Total $795
Shipping:
Shipping for 1 Front Lip will be $65 to the lower 48 states.
Shipping for 1 pair of sideskirts will be $65 to the lower 48 states.
Shipping for a Rear Half Bumper will be $125 to the lower 48 states.
Combined shipping:
1 pair of sideskirts + Rear half bumper .... $125 to the lower 48 states.
Shipping for the full aero lip kit is $125 to the lower 48 states.
We do in fact ship to Hawaii & Puerto Rico as well as ship internationally, so please PM me with your Country and Postal Code if you are seriously interested in a rate quote. I say "seriously" because we do have to call around for the best rates, which do take quite a bit of time. However, we do understand that international shipping is costly and if it is beyond your budget, that is perfectly fine .
*The only way to save on international shipments is to combine shipping with fellow enthusiasts around your area who might be interested in our products. The weight of the package does not matter nearly as much as the size of the box. If we can stuff two more aero kits in a box, why not ?
This is one of the first aero kits we offered to the Z community and there is a good chance we're thinking about discontinuing is depending on the demand.
Picture Time!
Our Version:
These are pictures taken by our customers so if they're dark, you know who to blame
. About Our Products:
Most of our products, including the full Amuse replica aero kit, are made from a material we call Hybrid FRP. FRP stands for Fiber Reinforced Plastic and another well known term for it is "fiberglass." So yes, FRP is simply a more fancy term for fiberglass. Please do not differentiate the two because body kit manufacturers will more than likely tell you their product is made from "FRP" hoping the consumer thinks it's something more advanced than fiberglass.
Fiberglass is generally hard and brittle. Some parts are light and some parts are heavy. It all depends on the skill level of the person making the product; light is better. Hard and brittle are definitely not characteristics you would want in an aero kit which is most likely going to hit something on the ground through the course of daily driving. Something hard and brittle tends to crack easily.
Our parts are flexible fiberglass and we decided to give it the name Hybrid FRP simply because the materials used are not conventional in fiberglass parts. The materials are exclusively formulated by our company to get the results we want. Our new products have a specially formulate surface coat, which is a flexible primer, which is easier to sand than gel coat (found in most FRP aero parts) and also adheres better to primer and paint. Careful selection of fabrics and resins used ensure that we offer a unique product our competitors claim to have and only wish they had.
Painting our Aero Parts:
The same process is used to paint our parts as it is to paint general FRP aftermarket aero parts. However, we have a recommended process that uses a combination of flexible primer and flexible clear coat. More info can be found here.
http://www.rx7club.com/showthread.php?t=628233
Return Policy
If you are unsatisfied with our aero products, you can return them for a full refund. No restocking fee. However, items must be returned in the condition it was sent within 14 days of receiving the product. We are open and fair with our customers as long as our customers are open and fair with us.
Please let me know if you guys have any further questions.
Ken Ching
CEO, Shine Auto Project Inc.
Last edited by ShineAutoProject; 07-25-2007 at 01:07 PM.
Trending Topics
02-24-2008 | 09:19 PM
#17
Registered User
iTrader: (8)
Joined: Jan 2004
Posts: 726
Likes: 0
From: Northridge, Earthquake Central
omg i'd buy the a full bumper replica!!! are you CRAZY!!!!!!! 
only thing stopping me from buying the authentic is because i'm afraid of fiberglass
please oh please...consider making the full bumper!!!!
-STeve
only thing stopping me from buying the authentic is because i'm afraid of fiberglass
please oh please...consider making the full bumper!!!!
-STeve
