Don Nguyen | Black Roof Vinyl Wrap Pictures - Q&A/FAQ/etc.
#1
Vendor - Former Vendor
Thread Starter
iTrader: (21)
Join Date: Mar 2008
Location: Irvine, CA
Posts: 1,355
Likes: 0
Received 0 Likes
on
0 Posts
Don Nguyen | Black Roof Vinyl Wrap Pictures - Q&A/FAQ/etc.
Hey guys,
I am a new vendor to the forum, which specializes in roof wraps, car wraps, tail light tinting, graphics, etc. Basically anything and everything that's related to vinyl in one form or another.
As you'll notice, most of my pictures right now will be of BMWs, because that's where I started from. However, as I start getting some more 350z guys doing this and getting pictures of their cars, I'll be sure to post them up
I get people asking me the what a gloss black roof versus a matte black roof looks like all the time, so I will start out with two almost identical E90s. The first one went with a gloss black finish, while the second one went with a matte black finish. It'll give you guys a good idea of how the two compare/contrast.
Gloss black:
Matte black:
If you guys are looking for any vinyl materials to cover your roof, etc, shoot me a PM with what you need or post up any questions you might have.
-Don
donathon@gmail.com
I am a new vendor to the forum, which specializes in roof wraps, car wraps, tail light tinting, graphics, etc. Basically anything and everything that's related to vinyl in one form or another.
As you'll notice, most of my pictures right now will be of BMWs, because that's where I started from. However, as I start getting some more 350z guys doing this and getting pictures of their cars, I'll be sure to post them up
I get people asking me the what a gloss black roof versus a matte black roof looks like all the time, so I will start out with two almost identical E90s. The first one went with a gloss black finish, while the second one went with a matte black finish. It'll give you guys a good idea of how the two compare/contrast.
Gloss black:
Matte black:
If you guys are looking for any vinyl materials to cover your roof, etc, shoot me a PM with what you need or post up any questions you might have.
-Don
donathon@gmail.com
#4
Vendor - Former Vendor
Thread Starter
iTrader: (21)
Join Date: Mar 2008
Location: Irvine, CA
Posts: 1,355
Likes: 0
Received 0 Likes
on
0 Posts
Thanks. Really looking forward to some local Z guys who want to get this done. Sold a bunch of vinyl/overlays for non local guys so far.
Some more pictures for you guys:
Gloss black on an E92 M3.
-Don
Some more pictures for you guys:
Gloss black on an E92 M3.
-Don
Trending Topics
#13
Vendor - Former Vendor
Thread Starter
iTrader: (21)
Join Date: Mar 2008
Location: Irvine, CA
Posts: 1,355
Likes: 0
Received 0 Likes
on
0 Posts
I guess I could do that. However, you'd have to provide me with the size you want them to be in, or else I won't have anything to go off of when I make them for you.
Just PM me once you are able to figure out the sizes, and we can get something together for you
-Don
Just PM me once you are able to figure out the sizes, and we can get something together for you
-Don
#15
Registered User
iTrader: (29)
Well it was not as clean as I thought to get a size for you as the B pillar is:
Wide:
4 inch Bottom "flat bottom"
1mm under 3 1/2 inch top "slanted top from left to right it is higher to lower."
Long
9 1/2 inch front "left side going to front of car"
Just under 8 1/2" rear "right side going to hatch"
Wide:
4 inch Bottom "flat bottom"
1mm under 3 1/2 inch top "slanted top from left to right it is higher to lower."
Long
9 1/2 inch front "left side going to front of car"
Just under 8 1/2" rear "right side going to hatch"