ETA is possibly mid to late March.

Sometimes it doesn't take much to set off a car. In this case, the owner of this black Nissan 350z came by to have me vinyl wrap the two side door vertical pillars in the 3M 1080 gloss carbon fiber finish. In addition to those, he also had me lightly tint / smoke the front bumper ambers to tone them down, but not completely black them out. The owner of this car drove out to me in Anaheim Hills / Orange County. Overall small / minor things done to the car, but sometimes it's those small minor details that really makes the car.

Before:


After:






Before:


After:


-Don Nguyen

donathon@gmail.com

 

The owner of this black Mercedes Benz E550 sedan came to me in Anaheim Hills / Orange County to have me black out his chrome / brushed aluminum window trim and also had me lightly tint / smoke the tail lights on his car. He was overall going with a darker theme with his car, so these two changes really help tie that theme together. I took some pictures of the tail lights inside and outside to show how it looks like in different lighting scenarios. Also, for the trim, we went with the matte black finish over the gloss finish for his car.

Before:








After:














-Don Nguyen

donathon@gmail.com

 

This is not exactly what I normally post, but for some reason I had two cars come in on the same day to have me do the same thing on both cars. Both cars had roof rails that were starting to corrode / fake / peel, and they wanted me to wrap them in vinyl to cover up the imperfections and give the pieces a consistent finish again. Ideally, the pieces should be smooth for the best results, but worse comes to worse, even if they aren't smooth, at least they are one color/finish again after being wrapped.

First car had silver / chrome roof rails and they wanted me to wrap it in gloss black. Second car had factory matte black roof rails, and they wanted me to just rewrap them in my matte black vinyl finish. The pictures aren't the best, since I was fairly busy that day and I wasn't even sure if I was going to be using these pictures later on as well.

Before:




After:




Before:


After:


-Don Nguyen

donathon@gmail.com

 

I had this brand new white BMW F30 335i sedan come by to have me vinyl wrap their car's roof in my gloss black vinyl material. I think this is the first mod that the owner of this car did. Just goes to show that getting a black roof done looks good by itself or as finishing touches to a car that already has other modifications done to it. I believe the owner of this car was around Orange County as well and drove out to me in Anaheim Hills to get the work done. We went with gloss black on this car to match his already factory gloss black mirrors and window trim pieces.

Before:




After:
















-Don Nguyen

donathon@gmail.com

 

I forgot to take some before pictures of this car, but I am sure you guys can imagine what it might have looked like before/stock. The owner of this car had me vinyl wrap the roof of his white BMW E92 335i coupe with my gloss black material. In addition to his roof, I also wrapped his chrome / brushed aluminum window surround in my gloss black vinyl material as well to match the roof. Small changes, but it really made the car pop a lot more. I thought with the addition of the black roof and window trim, it really made the car a lot cleaner and everything flows nicely even with the contrasting roof. He drove out to me in Orange County / Anaheim Hills to get the work done. I believe the owner of the car was from around Los Angeles area/county or something like that.

















-Don Nguyen

donathon@gmail.com

 

The owner of this silver E46 M3 coupe came by to have me vinyl wrap the roof of his new-to-him car with the 3M di-noc matte carbon fiber vinyl finish. The owner of this car was from around LA and drove out to me in Anaheim Hills / OC to get the work done. The matte roof went well with his gunmetal / darker grey colored wheels. The owner wanted to go for that CSL style look, so this is what the results were:

Before:




After:
















-Don Nguyen

donathon@gmail.com

 

This is one of my favorite mods to do on cars. My other favorite is getting rid of the chrome on cars. Tinting the tail lights light like this really gives the car a OEM+ look. It's good for cars that want to change up the look of the car a bit, without making it very obvious or noticeable what was done. However, that doesn't mean that this won't work or look good on modified car as well. I also like the light tint because it's less likely to get you pulled over, since so many cars come with slightly darker tail lights from the factory already as it is (IE BMW blacklines for their tail lights, etc).

Before:




After:






-Don Nguyen

donathon@gmail.com

 

07 350z gloss black roof wrap, I'll come to you. Price installed or just the vynal.

 

Oh man I really like this! Just a touch darker. Looks better without looking like it doesn't belong. I digs! Can you do a pre-cut for a '05 350Z to 85016?

-Rick

 

Sorry, but I do not use/do pre cut pieces. I prefer not to do them because any slight variation or stretch in them during install will basically ruin the install.

-Don

 

Starting to get more of the new BMW 3 series F30 bodies come in like this white 328 sedan. I vinyl wrapped the roof on this car in my gloss black vinyl material. This car was pretty interesting because it did not have a sunroof, which most newer cars always comes with. Turned out nice. Mirrors were already black from the factory as well as the shadowline window trim on the car. The owner of the car drove out to me in Orange County / Anaheim Hills to get the work done.

Before:




After:














-Don Nguyen

donathon@gmail.com

 

PM quote on matte carbon for the roof shipped to 92336

 

Price on material to do a 350z gloss black roof shipped to 27295 please

 

I've PMed you in the past for the material prices before. It's the same as it was before/last time.

-Don

 

The owner of this brand new black Porsche Cayenne Hybrid had me vinyl wrap the chrome window trim/surround on his car with my gloss black vinyl material. We went with the gloss black to match the B pillars of his car, which were also already gloss black from the factory. It really changed the look of the car, especially with the tinted windows and black wheels that he had. The owner of this car was also in Orange County.

Before:






After:






-Don Nguyen

donathon@gmail.com

 

The owner of this white Audi R8 was getting other work done on the car and he decided to have me tint his headlights with my light smoke/tint film as well. The owner of this car was from around the Los Angeles county area and drove out to me in Orange County to get the work done. I took some pictures of the car with the headlights off and the parking lights on to show how the light transmission looked like after the install was done. Over, it gave it a nice meaner look without reducing overall light output by anything too much.

Before:




During - Driver (right) side tinted/smoked, passenger (left) side stock.


After:






-Don Nguyen

donathon@gmail.com

 

For the roof of this white Nissan 370z, I vinyl wrapped it in the 3M dinoc matte carbon fiber material. I did not take before pictures, since time was against my side, but I am sure you can imagine how it probably looked like before. I think the cf went well with the overall styling of the rest of the car. The owner of this car was from around Redlands or Riverside county and drove out to me in Orange County/Anaheim Hills to get the work done.











-Don Nguyen

donathon@gmail.com

 

im in corona ca, looking to wrap the roof,a-pillars, b-pillars and rear hatch. in either satin black or carbon fiber style. can you give me a quote on everything i stated and then a quote on everything i stated minus the hatch? thanks, Brian

 

I do not have satin black. Do you mean matte black?

-Don

 

The owner of this grey/gunmetal colored Mercedes Benz C63 AMG had me vinyl wrap the chrome / brushed aluminum window trim/surround on his car with my matte black vinyl material. The owner wanted the shadowline look. In addition to the window trim, I also vinyl wrapped the b pillars and trunk handle on his car with the 3M dinoc matte carbon fiber material. It's a nice little finishing touch on the car and I think it went well with the overall theme and color of the car.

Before:








After:










-Don Nguyen

donathon@gmail.com