Notices
Body Exterior Body kits, grills, HID kits, etc.

$49.99 DIGITAL HID XENON KITS ALL SIZES AND COLORS 2 Year Warranty

 
Old Aug 26, 2010 | 07:13 AM
  #41  
TspNY's Avatar
TspNY
Thread Starter
Vendor - Former Vendor
iTrader: (2)
 
Joined: Aug 2010
Posts: 520
Likes: 0
From: Long Island, NY
Default

We are new vendors on my350z, but have been vendors of the best HID kits available on the market for the past 4 years. Our kits are fully digital and waterproof. They are error free with all German and luxury vehicles. For a limited time our kits are on sale for 49.99. We also offer phone support on all your installations. Please visit www.tspny.com to place your order.
These are TspNY Brand HID kits. They come with a true 2 year warranty. The kit comes with a warranty card and all kits are serial numbered. No fake "verbal warranties" here. I have all sizes and colors. Include 6000k, 8000k, 10000k, 12000k and 3000k yellow, Extreme Pink, Blue and Purple. These kits are error free and will not give any lamp out errors with German cars. All kits are in stock, special orders can be arranged. Kit details are as follows:

Features:
1. Strong and rapid startup
2. High brightness: can reach 3,600LM
3. Steady brightness
4. Good performance with high and low temperature resistance
www.tspny.com
Parameters:
1) Input voltage rage: DC 8-18V
2) Rated voltage: 13.5V
3) Max. start voltage: 23kV
4) Input current: 3.1A+/- 5%
5) Output power: 35W+/-2W
6) Luminosity: 3,600 lumens
7) Working temperature: -40 ~ +105°C
8) Color temperature: 4,300K - 12,000K or above
9) Life-span: 3,000 hours
10) Startup time: can reach 20% of the standard brightness within 1 second; can reach 80% of the standard brightness within 4 seconds
11) Auto cut-off: once there is a short circuit or open circuit, the ballast will
stop working automatically
12) Protection voltage: when the voltage exceed 19V, the ballast will stop working
automatically, and make the output power below 45W, to protect the ballast and
bulb from damage. When the voltage is 8V, the ballast still can work normally,
but when the voltage is below 7V, the ballast will stop working to protect the ballast
from damage
13) Reverse polarity protection: the ballast will stop working automatically when
a reverse polarity happens
14) Radiation:
Relative value: less than -70dB
Absolute value: less than 20mW for standard wireless interference
Relative value: less than -90dB
Absolute value: less than 5mW for our product

order your kits at www.tspny.com

Contact Info:
631-567-1444


EXTREME COLORS AVAILABLE AT NO EXTRA COST

Fully Digital Chrome Ballast


We have been in business for over 2 years and on other sites. We may be new here but we strive to give the best products with the best pricing and most importantly with the best customer service. Here is a link to our customer gallery on another site.
http://www.b20vtec.com/forums/....html

youtube videos of our kits fully underwater and being turned on and off, we dare any of our competitors to do the same.
Old Aug 26, 2010 | 07:25 AM
  #42  
2fasst's Avatar
2fasst
Registered User
iTrader: (6)
 
Joined: Dec 2008
Posts: 363
Likes: 2
From: Bay Area
Default

Hi, a few questions:

1. Where are the kits manufactured?
2. Do you have slim ballasts?
3. Do you have 55Watt version?
Old Aug 26, 2010 | 08:07 AM
  #43  
Dr. Venture's Avatar
Dr. Venture
Registered User
iTrader: (19)
 
Joined: Apr 2008
Posts: 2,697
Likes: 3
From: Dirty Jersey
Default

Originally Posted by 2fasst
Hi, a few questions:

1. Where are the kits manufactured?
2. Do you have slim ballasts?
3. Do you have 55Watt version?

Well i just got my set for my GF's car. And all the directions are in English..lol! Might be a USA made product.

and when i was purchasing i noticed they did have a "slim ballast" option.

I will be installing them today around 4 Eastern time.

Last edited by Dr. Venture; Aug 26, 2010 at 08:09 AM.
Old Aug 26, 2010 | 08:39 AM
  #44  
TspNY's Avatar
TspNY
Thread Starter
Vendor - Former Vendor
iTrader: (2)
 
Joined: Aug 2010
Posts: 520
Likes: 0
From: Long Island, NY
Default

Originally Posted by Dr. Venture
Well i just got my set for my GF's car. And all the directions are in English..lol! Might be a USA made product.

and when i was purchasing i noticed they did have a "slim ballast" option.

I will be installing them today around 4 Eastern time.
If you need any assistance, or have any questions during install please do not hesitate to call us at 631-567-1444
Originally Posted by 2fasst
Hi, a few questions:

1. Where are the kits manufactured?
2. Do you have slim ballasts?
3. Do you have 55Watt version?
1. They are made in China, but are not to be compared to other kits being sold online, our kits are fully digital AC ballast kits, that is why our kits have no issues with German cars.
2. Yes we do have slim kits. You have the option to select them during time of check out.
3. we do not sell sell 55watt kits due to the fact that there is only a 15% light difference, and it uses alot more power causing more stress to your wire harness, and we found the ballasts do no last as long. We only sell kits that will last for years of great service.

Thanks
TSPNY
Old Aug 26, 2010 | 02:03 PM
  #45  
350zJDMnismo27's Avatar
350zJDMnismo27
Registered User
iTrader: (12)
 
Joined: Nov 2009
Posts: 328
Likes: 0
From: Petaluma CA
Default

what size bulb do I need for a 06-08 headlight for the low beams
Old Aug 26, 2010 | 05:49 PM
  #46  
TspNY's Avatar
TspNY
Thread Starter
Vendor - Former Vendor
iTrader: (2)
 
Joined: Aug 2010
Posts: 520
Likes: 0
From: Long Island, NY
Default

Originally Posted by 350zJDMnismo27
what size bulb do I need for a 06-08 headlight for the low beams
If its the for 06-08 it says that they all come with the d2s factory HID bulb. If your car isn't HID equipped my list states it comes with an h7

Thanks
TSPNY
Old Aug 27, 2010 | 06:48 AM
  #47  
TspNY's Avatar
TspNY
Thread Starter
Vendor - Former Vendor
iTrader: (2)
 
Joined: Aug 2010
Posts: 520
Likes: 0
From: Long Island, NY
Default

www.tspny.com
Old Aug 27, 2010 | 06:53 AM
  #48  
MI 35th's Avatar
MI 35th
OGPremierMafia
Premier Member
iTrader: (16)
 
Joined: Feb 2005
Posts: 5,106
Likes: 0
From: Cincinnati OH
Default

I am doing a retro mod on my Aprilia, I only need a single Ballast for the low beam. Any chance on selling separately?
Old Aug 27, 2010 | 10:31 AM
  #49  
TspNY's Avatar
TspNY
Thread Starter
Vendor - Former Vendor
iTrader: (2)
 
Joined: Aug 2010
Posts: 520
Likes: 0
From: Long Island, NY
Default

Originally Posted by MI 35th
I am doing a retro mod on my Aprilia, I only need a single Ballast for the low beam. Any chance on selling separately?
sorry we do not currently sell the ballasts individually.
Thanks
TSPNY
Old Aug 29, 2010 | 06:07 PM
  #50  
TspNY's Avatar
TspNY
Thread Starter
Vendor - Former Vendor
iTrader: (2)
 
Joined: Aug 2010
Posts: 520
Likes: 0
From: Long Island, NY
Default

www.tspny.com
Old Aug 30, 2010 | 08:15 AM
  #51  
TspNY's Avatar
TspNY
Thread Starter
Vendor - Former Vendor
iTrader: (2)
 
Joined: Aug 2010
Posts: 520
Likes: 0
From: Long Island, NY
Default

www.tspny.com
Old Aug 30, 2010 | 04:50 PM
  #52  
TspNY's Avatar
TspNY
Thread Starter
Vendor - Former Vendor
iTrader: (2)
 
Joined: Aug 2010
Posts: 520
Likes: 0
From: Long Island, NY
Default

www.tspny.com
Old Aug 31, 2010 | 06:23 AM
  #53  
TspNY's Avatar
TspNY
Thread Starter
Vendor - Former Vendor
iTrader: (2)
 
Joined: Aug 2010
Posts: 520
Likes: 0
From: Long Island, NY
Default

www.tspny.com
Old Aug 31, 2010 | 09:43 AM
  #54  
Dr. Venture's Avatar
Dr. Venture
Registered User
iTrader: (19)
 
Joined: Apr 2008
Posts: 2,697
Likes: 3
From: Dirty Jersey
Default

Well the lights worked out amazingly well for the GF's Altima. Thanks!
Old Aug 31, 2010 | 07:39 PM
  #55  
TspNY's Avatar
TspNY
Thread Starter
Vendor - Former Vendor
iTrader: (2)
 
Joined: Aug 2010
Posts: 520
Likes: 0
From: Long Island, NY
Default

Originally Posted by Dr. Venture
Well the lights worked out amazingly well for the GF's Altima. Thanks!
Glad you are enjoying them. Post some pics when you get a chance.
Thanks
TSPNY
Old Sep 1, 2010 | 09:40 AM
  #56  
TspNY's Avatar
TspNY
Thread Starter
Vendor - Former Vendor
iTrader: (2)
 
Joined: Aug 2010
Posts: 520
Likes: 0
From: Long Island, NY
Default

www.tspny.com
Old Sep 1, 2010 | 05:19 PM
  #57  
TspNY's Avatar
TspNY
Thread Starter
Vendor - Former Vendor
iTrader: (2)
 
Joined: Aug 2010
Posts: 520
Likes: 0
From: Long Island, NY
Default

www.tspny.com
Old Sep 1, 2010 | 05:29 PM
  #58  
NJzFinestG's Avatar
NJzFinestG
Registered User
iTrader: (7)
 
Joined: Oct 2007
Posts: 134
Likes: 0
From: Freehold, NJ
Default

just orderd 2 more kits 2nite. haha i think i bought 5 kits total so far for my friends!! do i get any referral reward?? lol

did shipping go up? site says its 20 for ground shipping. last time i paid 10 for 2 kits

Last edited by NJzFinestG; Sep 1, 2010 at 06:08 PM.
Old Sep 2, 2010 | 02:15 PM
  #59  
TspNY's Avatar
TspNY
Thread Starter
Vendor - Former Vendor
iTrader: (2)
 
Joined: Aug 2010
Posts: 520
Likes: 0
From: Long Island, NY
Default

Originally Posted by got 3.5?
just orderd 2 more kits 2nite. haha i think i bought 5 kits total so far for my friends!! do i get any referral reward?? lol

did shipping go up? site says its 20 for ground shipping. last time i paid 10 for 2 kits
shipping did not go up, as far as I know shipping is calculated through UPS during time of checkout, I will look into that tomorrow morning.
Thanks
TSPNY
Old Sep 3, 2010 | 07:24 AM
  #60  
TspNY's Avatar
TspNY
Thread Starter
Vendor - Former Vendor
iTrader: (2)
 
Joined: Aug 2010
Posts: 520
Likes: 0
From: Long Island, NY
Default

www.tspny.com

Thread Tools
Search this Thread

All times are GMT -8. The time now is 09:25 PM.