www.tspny.com

 

We are new vendors on my350z, but have been vendors of the best HID kits available on the market for the past 4 years. Our kits are fully digital and waterproof. They are error free with all German and luxury vehicles. For a limited time our kits are on sale for 49.99. We also offer phone support on all your installations. Please visit www.tspny.com to place your order.
These are TspNY Brand HID kits. They come with a true 2 year warranty. The kit comes with a warranty card and all kits are serial numbered. No fake "verbal warranties" here. I have all sizes and colors. Include 6000k, 8000k, 10000k, 12000k and 3000k yellow, Extreme Pink, Blue and Purple. These kits are error free and will not give any lamp out errors with German cars. All kits are in stock, special orders can be arranged. Kit details are as follows:

Features:
1. Strong and rapid startup
2. High brightness: can reach 3,600LM
3. Steady brightness
4. Good performance with high and low temperature resistance
www.tspny.com
Parameters:
1) Input voltage rage: DC 8-18V
2) Rated voltage: 13.5V
3) Max. start voltage: 23kV
4) Input current: 3.1A+/- 5%
5) Output power: 35W+/-2W
6) Luminosity: 3,600 lumens
7) Working temperature: -40 ~ +105°C
8) Color temperature: 4,300K - 12,000K or above
9) Life-span: 3,000 hours
10) Startup time: can reach 20% of the standard brightness within 1 second; can reach 80% of the standard brightness within 4 seconds
11) Auto cut-off: once there is a short circuit or open circuit, the ballast will
stop working automatically
12) Protection voltage: when the voltage exceed 19V, the ballast will stop working
automatically, and make the output power below 45W, to protect the ballast and
bulb from damage. When the voltage is 8V, the ballast still can work normally,
but when the voltage is below 7V, the ballast will stop working to protect the ballast
from damage
13) Reverse polarity protection: the ballast will stop working automatically when
a reverse polarity happens
14) Radiation:
Relative value: less than -70dB
Absolute value: less than 20mW for standard wireless interference
Relative value: less than -90dB
Absolute value: less than 5mW for our product

order your kits at www.tspny.com

Contact Info:
631-567-1444


EXTREME COLORS AVAILABLE AT NO EXTRA COST

Fully Digital Chrome Ballast


We have been in business for over 2 years and on other sites. We may be new here but we strive to give the best products with the best pricing and most importantly with the best customer service. Here is a link to our customer gallery on another site.
http://www.b20vtec.com/forums/....html

youtube videos of our kits fully underwater and being turned on and off, we dare any of our competitors to do the same.

 

www.tspny.com

 

www.tspny.com

 

Placed my order

Hope these are better than my 2nd set of flickering DDM's...

 

Trying to get a set for my 92 300ZX fog lights. On your site it shows 2 choices for ballasts. Can you post a pic of the thin ballast?

Thanks

 

they definitely will be =)



we are currently back ordered on the slim ballast, but may I suggest you get the regular ballast anyway as they are more durable for fog light application.
Thanks
TSPNY

 

www.tspny.com

 

Got mine today (regular ballast, 6000k) and they look much better than the ddm's I had in terms of build quality and even comes with mounting brackets which the ddm's did not. I also noticed how your bulb base is metal compared to the ddm's plastic/rubber base that never seated correctly so the hid bulb goes in just like the stock H7 bulb without any issues.

I got my passenger side installed tonight along with my new 03-05 oem headlight (deer accident)... I am waiting on a new drivers side headlight to finish the install.

Gonna have the body shop aim the headlights when they paint and install my new 06+ bumper.

 

I'm glad you are happy with your purchase, I specifically special order the metal base bulbs for h7, h1, h3, and h4 because of the seating issue. It makes me happy when customers realize the difference in the quality of the kit
Thanks
TSPNY

 

You can really tell the difference.

 

thanks

 

www.tspny.com

 

www.tspny.com

 

Hope all are well on the east coast.
Thanks

 

what is the K being ran in most BMW's?? looks like a 6-10k???

please PM reply as I'm looking to make a purchase asap

 

really want to purchase a set but I have a question. I have an 07 with projector headlights and am a little hesitant of running aftermarket HID bulbs because I fear the light will be more scattered. This happened on my 02 maxima when I upgraded to 6k HIDs. Would the projectors with my car make this a non-issue?

Thanks. Also, please PM me a price for 6k bulbs shipped to 11364.

edit: Also PM'd ya

 

BMWs actually run a 4300k as do all other oem HIDs, the reason you see blue and purple in their lights is because of the projector headlights breaking up the light and you are seeing the prism effect.
We have installed many HIDs into 350z and with 6000k we saw very little to no scattering, your projectors are pretty high quality and give a good cut off line.
Thanks
TSPNY

 

We are new vendors on my350z, but have been vendors of the best HID kits available on the market for the past 4 years. Our kits are fully digital and waterproof. They are error free with all German and luxury vehicles. For a limited time our kits are on sale for 49.99. We also offer phone support on all your installations. Please visit www.tspny.com to place your order.
These are TspNY Brand HID kits. They come with a true 2 year warranty. The kit comes with a warranty card and all kits are serial numbered. No fake "verbal warranties" here. I have all sizes and colors. Include 6000k, 8000k, 10000k, 12000k and 3000k yellow, Extreme Pink, Blue and Purple. These kits are error free and will not give any lamp out errors with German cars. All kits are in stock, special orders can be arranged. Kit details are as follows:

Features:
1. Strong and rapid startup
2. High brightness: can reach 3,600LM
3. Steady brightness
4. Good performance with high and low temperature resistance
www.tspny.com
Parameters:
1) Input voltage rage: DC 8-18V
2) Rated voltage: 13.5V
3) Max. start voltage: 23kV
4) Input current: 3.1A+/- 5%
5) Output power: 35W+/-2W
6) Luminosity: 3,600 lumens
7) Working temperature: -40 ~ +105°C
8) Color temperature: 4,300K - 12,000K or above
9) Life-span: 3,000 hours
10) Startup time: can reach 20% of the standard brightness within 1 second; can reach 80% of the standard brightness within 4 seconds
11) Auto cut-off: once there is a short circuit or open circuit, the ballast will
stop working automatically
12) Protection voltage: when the voltage exceed 19V, the ballast will stop working
automatically, and make the output power below 45W, to protect the ballast and
bulb from damage. When the voltage is 8V, the ballast still can work normally,
but when the voltage is below 7V, the ballast will stop working to protect the ballast
from damage
13) Reverse polarity protection: the ballast will stop working automatically when
a reverse polarity happens
14) Radiation:
Relative value: less than -70dB
Absolute value: less than 20mW for standard wireless interference
Relative value: less than -90dB
Absolute value: less than 5mW for our product

order your kits at www.tspny.com

Contact Info:
631-567-1444


EXTREME COLORS AVAILABLE AT NO EXTRA COST

Fully Digital Chrome Ballast


We have been in business for over 2 years and on other sites. We may be new here but we strive to give the best products with the best pricing and most importantly with the best customer service. Here is a link to our customer gallery on another site.
http://www.b20vtec.com/forums/....html

youtube videos of our kits fully underwater and being turned on and off, we dare any of our competitors to do the same.

 

www.tspny.com