can you send me a price shipped for enough material to wrap my roof in gloss black? shipped to 94596.

 

roof size of the gloss black 2007 350z and carbon fiber for the bottom lip of the front bumper size, price pled please

 

PM sent.

Today is my last day for my August trip up here in norcal / Bay Area. I had this white Mercedes Benz C300 sedan come by earlier this week to have me do some vinyl work on it for him. He drove down from Napa to me in San Jose to get the work done. The owner of this car had me vinyl wrap the roof and the side door pillars in the 3M di noc matte carbon fiber and also had me black out the chrome on his window trim and rear trunk handle piece with my matte black finish vinyl material. In the darker lighting and from further away, you can't really make out the carbon fiber weave too much in the pictures. Matte black along the window trim went well with the matte carbon finish. The carbon pillars turned out pretty nice too.

Before:




After:



















-Don Nguyen

donathon@gmail.com

 

PM for price shipped to 37122

Want Gloss Black enough to do roof of 350z. and a slight addition to do the front lip in middle on botttom.

 

98030

Price for just enough to do middle part of lower bumper like others have asked
and price to do it twice?

Thx

 

PM sent.
s
-Don

 

Id like to know hot much to do the roof and lower middle bumper. Shipped to 76227

Thanks!

 

Price for hood and roof cf1080

 

Price for roof and middle lower bumper gloss black. Shipped 15205

 

How much for gloss black roof for 350z and g35 (enough for both)
and enough matte carbon fiber for 350z entire center console
price picked up please

 

Need gloss black vinyl for 350z roof wrap shipped to 12477. Also can you give me a separate price for carbon fiber wrap for the interior (center console, little door trim, little pieces on the steering wheel). Thank you

 

PM sent.

 

Here is a red Mitsubishi Evo 8 that I did probably a year and a half ago now. Just found the pictures while going through my old stock. The owner of this car had me vinyl wrap the top portion of his rear trunk spoiler in the 3M Di-noc matte carbon fiber material. The original carbon fiber piece that I was wrapping over had faded and yellowed out over time so he wanted me to wrap over it to give it to cover it up but still preserve that cf look. The owner of this car was around Malibu.









-Don Nguyen

donathon@gmail.com

 

What brand of vinyl do you have? 3M? I was looking to wrap the roof and hood in 3M carbon fiber. Does it come in gloss or just the standard flatter looking Carbon Fiber? May I have a quote for enough material to wrap those two areas please?

Maybe also a quote for install if you are planning to come back up to Norcal? In case I decide I don't want to tackle it. Thanks

 

It comes in both a matte and glossy finish for the 3M carbon fiber. The matte cf is the dinoc and the gloss cf is the 1080 line from 3M. If you're wrapping the hood, only the 3M 1080 will fit it. I'll shoot you a PM with a quote.

-Don

 

Price for a 1x5 sheet of the Gloss CF shipped to 50219?

Also would like a 1x5 of gloss white 3m and another gloss black 3m if available. Thanks!

 

How much for some 3m 1080 gloss carbon fiber. Enough to do the roof an hood on my 350z with like an extra 18"x30" piece shipped to 67460!

 

price shipped to 08009 gloss/gold black for a Z roof

 

will a 4ft X 4ft 3M Di-Noc CF be enough for wrapping the roof! If it is how much shipped to 55125 Twin Cities!

Thanks

 

hey don, how do you think 3m carbon fiber will hold up on a boat? not the underside white part but the upper part of a 17ft bowrider.