you would need to tell us which exact steering wheel

the short hub is intended to bolt to the quick release. To use it directly to the wheel requires a separate adapter, which comes in various thicknesses ranging from 10mm to 30mm

 

ttt

 

any shots of the OMP seats installed?

 

no sorry

 

how much for a personal grinta suede black with red stitch with the short works splash and a red quick disconnect shipped to 98023?

 

Can I get a price on the hub, quick disconnect in black and the wood grain classic 350mm shipped to 79705, thank you

 

ttt

 

How much shipped for Nardi Sport Rally Deep Corn and everything needed for install? (ie hub, qr, airbag resistor, etc.) 95829

 

only 30 made!!!!





$295 each + shipping. Contact us for a package deal with Works Bell Japan hubs and/or quick releases

 

Quote for Workbell hub to 20877 for my personal suede steering wheel

 

price of the kingston to 91326 please?

 

hubs come in 2 different lengths, please see:

http://z1auto.com/prodmore.asp?model...or&prodid=1264

 

$309 delivered

 

Scratch what I said before;
Quote for the steering wheel 330mm, quick release, and anything else I would need. Does that steering wheel come in a darker blue threading? I've seen one around like that. I mention this because I am doing an LED mod with blue LEDs on my speedometer and other meters (changing the facing to white from the stock orange/yellow) Do you think the blue speedmeters/meters and red steering wheel would clash, color wise?

Any possible suede option?

 

not sure what steering wheel you're referring to. There are no options for color or material beyond what our site has listed

As far as the color, too much matching is just as bad, if not worse, than some contrast. So, if you're doing a steering wheel with a red stitch, then perhaps carry that over a bit with one of our red stitched shift boots and tie it all together cleanly. Coordinates, but not overdone

http://z1auto.com/prodmore.asp?model...or&prodid=5956

Or, just go with a wheel with more neutral stitching, such as just black, like:

http://z1auto.com/prodmore.asp?model...or&prodid=2473

http://z1auto.com/prodmore.asp?model...or&prodid=2461

or several of the Momo wheels

 

Great advice, I think I will go with the exact setup you have in the initial post. I will look through the site and send you an email, Adam. I'd like to get this stuff soon so I might be trying to buy today.

Cheers,

Mike

 

np, let us know if you have any questions

 

i had a quick question , would a nrg short hub work a works bell quick release?
and if you have any works bell quick releases in stock thanks

 

not something I can answer, based on feedback from customers who have the NRG quick release (not purchased from us), we won't offer it. Many have reported it gets very sloppy over time when actually put to use.

there are various types of quick releases, all can be found on our site:

http://z1auto.com/submodel.asp?model=350z&cat=interior

let us know which you want

 

can you PM me the price of a leather red stitch personal with a WB detach and a hub shipped to 33569?