FS: SOHO Motorsports Custom 3 Gauge Cluster
Thread Starter
Vendor - Former Vendor
iTrader: (1)
Joined: Sep 2011
Posts: 733
Likes: 0
From: Charlotte
The N/A package is a simple plug and play system with the following procedures:
-For the Wideband you will have to remove one of the rear oxygen sensors and replace it with the wideband sensor
-For the oil temperature sensor you will either have to tap into the side of the oil pan or if you have an oil pan spacer then there is a spot open for the temperature sensor to go into. if you are in need of a oil pan spacer we are able to get them from AAM.
-For the oil pressure sensor you can get a T at your local hardware store and tee off of the stock oil pressre switch.
Please contact us if you are interested in this combination or if you have any questions, thanks.
-For the Wideband you will have to remove one of the rear oxygen sensors and replace it with the wideband sensor
-For the oil temperature sensor you will either have to tap into the side of the oil pan or if you have an oil pan spacer then there is a spot open for the temperature sensor to go into. if you are in need of a oil pan spacer we are able to get them from AAM.
-For the oil pressure sensor you can get a T at your local hardware store and tee off of the stock oil pressre switch.
Please contact us if you are interested in this combination or if you have any questions, thanks.
Thread Starter
Vendor - Former Vendor
iTrader: (1)
Joined: Sep 2011
Posts: 733
Likes: 0
From: Charlotte
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM









