ok i searched but got a blank page... i just put on my bilstein PSS9 and took off my eibachs, now there is this guy with a G35 that wants to buy my springs. i know the springs will fit, but what i was wondering is will the car be too low or ride retarded??? i pretty sure this will work but dont want to sell the guy something that is not gonna function right. has anyone put 350Z lowering springs on a G35????????????????????
thanks

 

if he wants them, sell them!! its not your fault if wrok on his ride..

 

Yes, I have the TEIN 350z H-Tech springs on the front and the S-Tech springs on the rear of my G35. Perfect fit; no problems. However, whatever the "advertised" drop is for the Z it will be about 0.5" lower on the G35.

Good luck!
Ron

 

another .5" on top of that if it's a sedan (not the X)

 

ok thanks
its a G35C BTW

 

I know old thread but I didn't want to make a new one for a same question.

Will the 03+ G35 Coupe Tein S-Tech Springs fit a 03 350Z? If so, how much of a drop can I expect? I would be running them with stock everything else.

Thanks guys.

 

Oh they will fit, but they are beyond pointless to install.

Your oem spring rates now
314/342

Tein S-tech G35 coupe
Drop if run on 350Z .7”/.4” (fronts are progressive, rears are linear)
Spring rates in LBS 358/274

Way too soft in the rear.