Notices
Brakes & Suspension 350Z stoppers, coils, shocks/dampers

Before I Lower My Z?

Old Jan 10, 2017 | 05:27 PM
  #1  
Treefiddychris's Avatar
Treefiddychris
Thread Starter
Registered User
 
Joined: Jan 2017
Posts: 1
Likes: 0
From: Maryland
Default Before I Lower My Z?

I know this has probably been asked hundreds of times before but, I decided to get some Eibach Sportline Pro springs. I am wondering, since my car will be dropped 1.2 inches on both the front and back. Will i need to get new camber arms(and/or bolts) for the front and rear of the car? I know i am going to get the Tokico Blue shocks for all around the car. I am just wondering if i need to shell out a few more bucks to maintain proper alignment and reduce tire wear on my car. Coilovers are also out of the question.
Reply
Old Jan 10, 2017 | 05:40 PM
  #2  
pyshin's Avatar
pyshin
New Member
iTrader: (14)
 
Joined: Jun 2013
Posts: 2,314
Likes: 75
From: socal
Default

Take some time & read through this sticky thread:

https://my350z.com/forum/brakes-and-...ion-101-a.html
Reply
Old Jan 10, 2017 | 05:50 PM
  #3  
nizmo_0385's Avatar
nizmo_0385
New Member
iTrader: (5)
 
Joined: Sep 2014
Posts: 1,308
Likes: 117
From: Lakewood Washington
Default

eibach sportline lowering closer to 2.0 inches. I didn't need toe bolts when I had them. camber arms were needed to get close to stock.
Reply
Old Jan 10, 2017 | 08:20 PM
  #4  
terrasmak's Avatar
terrasmak
Super Moderator
MY350Z.COM
Premier Member
15 Year Member
Liked
Loved
Community Favorite
iTrader: (8)
 
Joined: Jan 2007
Posts: 29,119
Likes: 2,400
From: Sin City
Default

About $150 and you can get both camber arms and toe bolts. Simple and easy, do it once, do it right.
Reply
Old Jan 10, 2017 | 08:22 PM
  #5  
nizmo_0385's Avatar
nizmo_0385
New Member
iTrader: (5)
 
Joined: Sep 2014
Posts: 1,308
Likes: 117
From: Lakewood Washington
Default

Originally Posted by terrasmak
About $150 and you can get both camber arms and toe bolts. Simple and easy, do it once, do it right.
true. but if toe bolts aren't needed don't hack your subframe.
all Zs are a little different but as I stated in did not need the toe bolts
Reply


Thread Tools
Search this Thread

All times are GMT -8. The time now is 07:26 PM.