When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello, I have been battling a caster issue for a while now on the driver front wheel. I have BC racing coils and an aftermarket upper control arm in the front. I have replaced the lower control arms, compression arms and tie rod/ tie rod ends with new parts. This starting happening suddenly last year (no accident occurred but potholes are an issue in my area) and I haven't been able to figure out where the problem lies. I have done a lot of looking at the car and all bushing look good, and no arms look bent. The car pulls heavily to the right and is not very fun to drive. I was wondering if anyone had any a similar experience or know where I should go from here. I will attach the latest alignment sheet below. Thanks.
i would say part of your problems is you are one of the semi camber gang retards. pics of the car?
Originally Posted by wayned33
Hello, I have been battling a caster issue for a while now on the driver front wheel. I have BC racing coils and an aftermarket upper control arm in the front. I have replaced the lower control arms, compression arms and tie rod/ tie rod ends with new parts. This starting happening suddenly last year (no accident occurred but potholes are an issue in my area) and I haven't been able to figure out where the problem lies. I have done a lot of looking at the car and all bushing look good, and no arms look bent. The car pulls heavily to the right and is not very fun to drive. I was wondering if anyone had any a similar experience or know where I should go from here. I will attach the latest alignment sheet below. Thanks.
Caster Issue 2003 350z
