The wheels i was going to run with these are screwed now and i dont want to buy others just to have them. They fit over some 18, and almost all 19s. I just dont want to race on 19s. They do in fact fit over anniversery wheels.

See PDF for fitment. http://www.conceptzperformance.com/i...akeoutline.pdf


The 4 calipers are freshly sandplasted ready for powdercoating. They are brand new calipers purchases straight from infinity. I have all the pistons and seals individually seperated in ziplock baggies.

There front rotors are brand new straight from nissan.

The rear rotors i got off of ******* forums with very low miles.

Can go with or without the HPplus pads... depends on offer.

Has brand new adapters to make it work for the 350z.

Only thing lacking is the Pins, Clips, and shims and bolts which should be pretty cheap. I can aquire if neccessary.

Im looking for trade for a clean complete brembo setup give or take
06+ 2pots are an option with some cash on top
Only thing i would probally part is without the HP+ pads
Possible sell outright but probally not for what im asking.

http://www.conceptzperformance.com/c...524.183.228.72

1300 obo PM any offers.

 

FYI. Its the bolt needed to mount the caliper brackets needs, not the bolts that hold the calipers together. I have those.

 

I think they're going to make you put up a price. What caused the change of heart?

 

how much cash on top??? pm me

 

Im going to give some time for some brembos to get offered before i concider the 06+ for now. I shouldnt have put it on there as that is all i am getting PMs for now.

 

All FS threads must have a price, you aren't exempt dudecifer!

 

Fixed

 

Nice price GLWS!

 

so this has everything to install? waht is missing.

 

sorry, nevermind , just read the description better

 

bump

 

TTT

 

I understand that you don't want to part out.

If anyone else is interested in the fronts, I'll take the rears off your hands.

GLWS!

 

bump

 

how much are the missing part gonna cost to replace?

 

Here is what i can come up with what is missing.

Front shims/clips - http://www.courtesyparts.com/41080k-...724_8808_8809&

Front Pins (dont know how many is need) - http://www.courtesyparts.com/41217-p...724_8808_8809&

Rear Pins - http://www.courtesyparts.com/44217-p...-p-615613.html

Rear Shims/clips - http://www.courtesyparts.com/44080k-...724_8808_8810&

Im going to try to pay a visit to my local PITA Stealership... see what they have.

Then some grade 8 bolts would be 20 bucks maybe

 

PM sent.

 

PM sent homie

 

If these are still around let me know how much you want with all the shims and hardware I need without the pads.

 

guess he wasnt interested in my offer