Good news 350Z enthusiast, you can now upgrade your Brembo calipers using Racingbrake stainless steel pistons, dust boots and pressure seals look no further we got all the components you need. Notice that these RacingBrake caliper rebuild components do not include and do not require the use of shims. Eliminating the need for shims lowers overall cost and allows for more direct positive brake torque transmission resulting in better braking.

These stainless steel pistons are excellent upgrade from your stock aluminum pistons, not only they are stronger and more rigid than aluminum, they will not corrode and can transmit more brake torque but with less heat (about 1/10) than stock aluminum pistons.

Our pistons also have vents to further prevent heat transfer to fluid, allow you to run your brake system at lower temperature which means less replacement on brake fluid, and eliminate the use of titanium shims saving you down time, operating and maintenance cost.

If you are hard on brake and have been looking to improve your overall braking efficiency, and tired of replacing brake fluid and don't like the soft pedal due to the use of heat shield Titanium shims, look no more!

BENEFITS:
- high heat resistant rubber
- stainless steel pistons transfer less heat
- stronger rubber and less heat = less downtime & replacement cost



Boots and Seals Kit - Rear G35/350Z 2 Piston Caliper $28.00

Boots and Seals Kit - Front G35/350Z Piston Caliper $56.00

Piston Kit (Stainless Steel) - G35/350Z Rear 2 Piston Caliper $60.00

Piston Kit (Stainless Steel) - G35/350Z Front 4 Piston Caliper $120.00

Save 10% on G35/350Z complete front axle caliper rebuild components 8, stainless steel pistons, 8-dust boots and 8, pressure seals $ 316.80