FS: Drilled and Slotted Front and Rear Rotors and Hawk HPS Pads
#1
Registered User
Thread Starter
iTrader: (2)
Join Date: Sep 2009
Location: Orlando
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Drilled and Slotted Front and Rear Rotors and Hawk HPS Pads
Price: $225 SHIPPED for everything
Selling a set of Z1 drilled and slotted rotors (front and rear). The fronts are 12.6" and the rears are 12.13". They should fit most 05+ or 06+ 350z, g35, 370z, g37 without upgraded brakes (no brembos or akebonos). Generally speaking, 06+ for nissans, 05+ for infinitis.
Check links below for pad fitment.
Retail brand new for all of these are about $400-450.
Rotors are in good shape. One rear rotor has some minor scoring due to a bad wheel bearing for a little bit. You can see in the last four pictures comparison of the two rear rotors.
Also selling Hawk HPS pads, front and rear. HPS pads are street level pads. Good alternative to OEM pads for longevity and decent temperature performance without being too aggressive on the rotors, dust and noise.
Front pads are 9mm out of 14mm (64%). Rears are 5 to 6 mm out of 14 mm (35%).
I prefer to sell as a whole set, but will consider parting out later on.
Here are the links to the Hawk website and Z1 website which lists the applications (vehicles) for fitment.
Front Hawk Pads
Rear Hawk Pads
Z1 Front and Rear Rotors
PM for info or questions. Thanks
Fronts
Rears
Closer look at rear rotors
Selling a set of Z1 drilled and slotted rotors (front and rear). The fronts are 12.6" and the rears are 12.13". They should fit most 05+ or 06+ 350z, g35, 370z, g37 without upgraded brakes (no brembos or akebonos). Generally speaking, 06+ for nissans, 05+ for infinitis.
Check links below for pad fitment.
Retail brand new for all of these are about $400-450.
Rotors are in good shape. One rear rotor has some minor scoring due to a bad wheel bearing for a little bit. You can see in the last four pictures comparison of the two rear rotors.
Also selling Hawk HPS pads, front and rear. HPS pads are street level pads. Good alternative to OEM pads for longevity and decent temperature performance without being too aggressive on the rotors, dust and noise.
Front pads are 9mm out of 14mm (64%). Rears are 5 to 6 mm out of 14 mm (35%).
I prefer to sell as a whole set, but will consider parting out later on.
Here are the links to the Hawk website and Z1 website which lists the applications (vehicles) for fitment.
Front Hawk Pads
Rear Hawk Pads
Z1 Front and Rear Rotors
PM for info or questions. Thanks
Fronts
Rears
Closer look at rear rotors
Thread
Thread Starter
Forum
Replies
Last Post
Jime
Drivetrain
5
12-13-2015 07:30 AM