FS: Stoptech 6 Piston\2 Piston BBK ST60\ST22 RED
#1
Stoptech 6 Piston\2 Piston BBK ST60\ST22 RED
Complete set of StopTech Big Brake Kit 6 Pistons front and 2 Pistons Rear. This is a matching ratio set as designed by StopTech for perfect brake bias.
I chose a 2 Piston rear to save weight, however, the piston size is a perfect match with the 6 Piston front.
The kit had about 11-12K miles on them. I took them off my car along with other suspension stuff when I sold the car a few years ago. Plans changed and I'm beginning to post a few of my stuff for sale now.
What you see is what you get.
You save quite a bit of weight with these BBK as the stock brake calipers are cast iron while these are aluminum which saves weight and dissipates heat better.
The StopTech rotors also uses aluminum hats to save weight while the stock is a one piece steel unit.
Attached are pictures showing the weight of the stock front calipers vs the Stoptech. You save almost 4 LBS of unsprung weight at each corner.
-ST60 6 Piston front calipers x2
-ST22 2 Piston rear calipers x2
-Complete brackets already mounted
-StopTech braided brake lines x4
-Stoptech street brake pads
-StopTech big front rotors with aluminum hats x2
-StopTech big rear rotors with aluminum hats x2
$2250 shipped, and no I don't need your stock brakes
I take money order or Paypal. If paying via Paypal please cover the 3% paypal fees.
thanks..and drive safely (with BBK )
I chose a 2 Piston rear to save weight, however, the piston size is a perfect match with the 6 Piston front.
The kit had about 11-12K miles on them. I took them off my car along with other suspension stuff when I sold the car a few years ago. Plans changed and I'm beginning to post a few of my stuff for sale now.
What you see is what you get.
You save quite a bit of weight with these BBK as the stock brake calipers are cast iron while these are aluminum which saves weight and dissipates heat better.
The StopTech rotors also uses aluminum hats to save weight while the stock is a one piece steel unit.
Attached are pictures showing the weight of the stock front calipers vs the Stoptech. You save almost 4 LBS of unsprung weight at each corner.
-ST60 6 Piston front calipers x2
-ST22 2 Piston rear calipers x2
-Complete brackets already mounted
-StopTech braided brake lines x4
-Stoptech street brake pads
-StopTech big front rotors with aluminum hats x2
-StopTech big rear rotors with aluminum hats x2
$2250 shipped, and no I don't need your stock brakes
I take money order or Paypal. If paying via Paypal please cover the 3% paypal fees.
thanks..and drive safely (with BBK )
Last edited by 2fasst; 05-15-2016 at 05:11 PM.
Trending Topics
#10
Lol...another highly educated member that guess but doesn't speak from facts. Did you ever weigh the stoptechs? If not you really should stfu and let looch weigh them for himself.
The stock calipers are iron while stoptrchs are aluminum. The stock rotors are one piece steel while the stoptechs uses aluminum hats.
Last edited by 2fasst; 06-17-2016 at 12:06 PM.
#11
350Z-holic
iTrader: (27)
Lol...another highly educated member that guess but doesn't speak from facts. Did you ever weigh the stoptechs? If not you really should stfu and let looch weigh them for himself.
The stock calipers are iron while stoptrchs are aluminum. The stock rotors are one piece steel while the stoptechs uses aluminum hats.
The stock calipers are iron while stoptrchs are aluminum. The stock rotors are one piece steel while the stoptechs uses aluminum hats.
Can't say that I weighed them but the oem rotors and calipers felt heavy when I was moving the boxes around.
Let's be serious here, most people (including me) buy stoptechs buy them for the bling factor due to weight saving=$$$
You keep getting p1ssed at people on the forum you might get an aneurysm:icon17