Notices
Drag NHRA, IDRC, IHRA, NDRA

need some help

Old Jun 22, 2007 | 08:28 PM
  #1  
bigmikewhite6's Avatar
bigmikewhite6
Thread Starter
Registered User
iTrader: (1)
 
Joined: Jul 2006
Posts: 71
Likes: 0
From: maryland
Default need some help

Okay guys i have an 03 touring with HFC, exhaust, spacer, cold air intake, JWT clutch fly combo. i running street tires and trying to launch my car at 2500 rpm some time it sticks real good and oter times all i do is wheel hop. i have the VDC off also. are the any mods other then slicks (thats in the future too) that i can do. Im thinking of some coilovers and 15inc welds with M/T but im not to sure on the best size for that i tryed to do a search on the tires but came up with not to much. my best 1/4 is a 13.655 at 108.27 with a R/T of .028. any help would be nice. thanks.
Reply
Old Jun 22, 2007 | 08:31 PM
  #2  
VeeTec's Avatar
VeeTec
Registered User
 
Joined: Jun 2004
Posts: 1,384
Likes: 0
From: Jackson County, GA
Default

Work on your launch, and post a slip for evaluation.

If you are indeed trapping 108.27 with those mods, that would be a record!
Reply
Old Jun 22, 2007 | 09:31 PM
  #3  
bacalhau16's Avatar
bacalhau16
Registered User
iTrader: (32)
 
Joined: Mar 2005
Posts: 3,148
Likes: 0
From: dartmouth
Default

Thats what stood out to me too. 108.57 mph trap speed. I think I may have to pull out the BS flag. In all my time here I have never used it either. This would be the first. Hopefully its just a typo on your part.

Now on to your launching. Stop dropping the clutch. Hold your RPM, lift the clutch a little bit loading the drivetrain. Then smoothly, quickly slip out the clutch. It should work. Only one other person on the forum has consistent wheel hop, and I suspect something is wrong with his suspension. There are numerous Z's, with good times, that dont suffer severe wheel hop unless they launched incorrectly. See what happens.
Reply
Old Jun 23, 2007 | 06:31 AM
  #4  
davidv's Avatar
davidv
Registered User
iTrader: (2)
 
Joined: Jun 2004
Posts: 42,753
Likes: 11
From: Tucson, AZ
Default

You are using different techniques. One where you get wheel hop, and one where you do not.

BTW I would also like to see the 108.2 MPH time slip.
Reply
Old Jun 23, 2007 | 05:52 PM
  #5  
ACEMAN's Avatar
ACEMAN
Master
Premier Member
iTrader: (29)
 
Joined: Jun 2002
Posts: 2,774
Likes: 2
From: Hagerstown MD
Thumbs down

Lets see a time slip buddy

Dont believe it

later
Todd
Originally Posted by bigmikewhite6
Okay guys i have an 03 touring with HFC, exhaust, spacer, cold air intake, JWT clutch fly combo. i running street tires and trying to launch my car at 2500 rpm some time it sticks real good and oter times all i do is wheel hop. i have the VDC off also. are the any mods other then slicks (thats in the future too) that i can do. Im thinking of some coilovers and 15inc welds with M/T but im not to sure on the best size for that i tryed to do a search on the tires but came up with not to much. my best 1/4 is a 13.655 at 108.27 with a R/T of .028. any help would be nice. thanks.
Reply


Thread Tools
Search this Thread

All times are GMT -8. The time now is 11:14 PM.