I have TWO used sets (2 spacers per set) of H&R Trak+ 20mm Hubcentric Wheel Spacers with new extended studs.

Specifications:

• H&R Part # 4065662
• Made in Germany
• Made from lightweight alloy
• Hubcentric
• 20mm thickness / width
• Bolt Pattern - 5 x 114.3
• Center Bore - 66.2 mm
• Tread Pitch - 12x1.25
• Can be used on 03-07 INFINITI G35, 03-08 NISSAN 350Z, 95-98 NISSAN 240SX, 87-96 300ZX, 95-07 MAXIMA, 07-08 SENTRA SE-R SPEC V, 03-07 MURANO, 03-07 FX35 FX45, 95-03 I30 I35

Notes:

• Set # 1 comes with NEW 8 x 45mm length studs and 2 x 40mm length studs (in SILVER)
• Set # 2 comes with NEW 10 x 50mm length studs (in GOLD)
• All studs are brand new, 12x1.25 pitch for Nissan/Infiniti
• Both sets have studs which meet or exceed factory length with the spacer installed.
• I only have 1 H&R carboard box available, this means the first person to meet with me gets H&R box, the 2nd person will get it in a bag or some other box.

Price: $120 CDN FIRM per set

If you want it, either send me a PM or e-mail me at paradigm905@hotmail.com. Local pickup only in Brampton during weeknights/weekends and in downtown Toronto near Ryerson University during certain weekdays.

Do not crap in my thread, take it to PM.

 

would you mind if i come for a test fit? i want to see how much it will bring out the front for me, im thinking +20 is too much but could be just right, let me know... or i could do it he old fashion way, ruler...

 

Sure you can drop by, however to properly try them on you would have to knock out your existing studs. Did you just want to place these over your existing studs and place the wheels besides them?

 

One set sold (set with 10 x 50mm length studs in gold)
One set remaining (8 x 45mm length studs and 2 x 40mm length studs)

 

Picked up the other set today! Easy to deal with and responded quickly! What else can you ask for?

 

both sets sold, thanks all.