FS: Nismo Clutch, RC injectors and some OEM parts
Thread Starter
Registered User
iTrader: (8)
Joined: Mar 2010
Posts: 201
Likes: 0
From: Mississauga, Ontario, Canada
Please forgive me for lack of pictures at the moment. I am out of town and my girlfriend is looking after things for me while I am gone. You can gladly inspect anything if you come by. Prices are not firm and I am open to reasonable offers.
Nismo Clutch and Pressure plate. I purchased this used from another board member with a little over 5000 MILES on it. I have not installed it and my current plans are going to require something a little stronger
$350
RC 1000CC injectors. Got these used with about 5000 miles on them, installed them for a week then got something smaller.
$300
OEM shocks and springs from a 2004 touring. about 100K on the car and I assume these are the original ones from the factory. I've owned the car for 2 years and had no issues with them. No leaks. I upgraded to a set of Tein's and these are just taking up space.
$150
Stock air filter and piping. I installed a vortech kit to all of this came out. I am currently waiting for the strafe pipe so I will even have the MAF housing
$100
Stock gauge pod. I took it out and put in my own gauges when I installed the vortech. This is out of a US car in case you care.
$75
Will also have a stock front and rear bumper available soon in silver. Front bumper needs a repaint. $100 each
Nismo Clutch and Pressure plate. I purchased this used from another board member with a little over 5000 MILES on it. I have not installed it and my current plans are going to require something a little stronger
$350
RC 1000CC injectors. Got these used with about 5000 miles on them, installed them for a week then got something smaller.
$300
OEM shocks and springs from a 2004 touring. about 100K on the car and I assume these are the original ones from the factory. I've owned the car for 2 years and had no issues with them. No leaks. I upgraded to a set of Tein's and these are just taking up space.
$150
Stock air filter and piping. I installed a vortech kit to all of this came out. I am currently waiting for the strafe pipe so I will even have the MAF housing
$100
Stock gauge pod. I took it out and put in my own gauges when I installed the vortech. This is out of a US car in case you care.
$75
Will also have a stock front and rear bumper available soon in silver. Front bumper needs a repaint. $100 each
Thread Starter
Registered User
iTrader: (8)
Joined: Mar 2010
Posts: 201
Likes: 0
From: Mississauga, Ontario, Canada
haha sorry to get you excited. it never bothered me being an american gauge pod. Only time I had trouble with it being an american car was when i test drove it. I assumed it was canadian so I did 65mph in a 60kmh right in front of a cop. Thankfully I didnt get a ticket.
Thread
Thread Starter
Forum
Replies
Last Post
350Z Project X
Suspension
9
Oct 10, 2015 09:23 AM




