When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This thread is hilarious but seriously if you want to shoot flames just buy a testpipe like me (increasing the psi on an FPR and adding an AFC will give you better results )
Since the Z doesnt come with a cigarette lighter, this mod will provide the flame needed to start that stogie or cigarette, or light that splif. Just make sure your hair is held back.
AHAHAHAH, gringott...funny guy. Anyway all u need is to remove the rev limiter, and punch it, dont bother Shifting(it's not needed, trust me)...you'll bound to get flames shooting somwhere. Where? Frankly, i dont realli care unless you take pictures..
just go all the way too redline like usual and do a WOT shift. If you dont know what that is:
1.pedal to the metal
2.hit cutch real fast
3.and then shift gears while gas is to the floor.
*hint* thats how all the srt4's do it, that's how i did it in my sti and in my old Z. definately need some test pipes and a non-sinle muflar exhaust tho
btw on monster garage they used a nitrous fogger and drilled into the tail pipe and sprayed gasoline... the tail pipe was hot enough to ignite the fogged gas and shot flames out of the back of the car.
All it took for me to pop flames was to add the Injen exhaust and test pipes. I started popping flames with those 2 mods, as I modded I stopped doing it at about 14.5:1 a/f(lean). Once tuned again by Technnosquare with a good 13:1 a/f, when I shift right at limiter it will throw a little flame out. Its cool I guess, not like I go around telling people I do it, but some people react funny when they see it.