Dear All,

For the past 5 years i own a 60K Mile 2005 MT with Stage 3 Stillen supercharger,
All was running great on stock motor (no big HP numbers here, 7PSI) till the 7th injector power line was disconnected during a hard pull and 3 pistons cracked...

Now i would like to replace pistons, rods, valves, injectors (taking out the 7th injector) and disassemble the Stillen piggy box for a with a proper tune\standalone ECU.

Would like to hear from your experience,
What do you would you order for parts?

- Pistons? 8.8:1?
- Injectors type?
- Tune?


Thank you !!





Missing Piece piston

 

I would go 11.1 and get the smallest pulley you can get for the supercharger.

 

With that kit I would run no piston smaller than 10:1

 

I would think with this particular kit you can due Up-Rev, Nissan GTR Injectors (570CC) and what ever the smallest pulley you can get with a big Crank pulley.

 

I'd post in forced Induction forum for more input.

gl