Trying to use 2004 harness and ecu on revup motor
#1
Registered User
Thread Starter
Join Date: May 2017
Location: Las Vegas
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Trying to use 2004 harness and ecu on revup motor
I saw a thread saying you can change the timing covers and a certain bolt to make this possible, been searching high and low I can't find it!
Basically I would like to run my rev up motor on a de harness!
Basically I would like to run my rev up motor on a de harness!
#2
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
There is a minor issue running the DE cam gears on Rev up cams, rest just swaps right over.
Don't remember the issue, I got rid of my rev up cams and going to run aftermarket
Don't remember the issue, I got rid of my rev up cams and going to run aftermarket
#3
New Member
iTrader: (5)
I rem reading a thread about this in the FI section. Maybe just skipped the exhaust side cam sensor.....but TBH it's beyond my knowledge level.
I just rem thinking I could have run a DE instead of my revup...mainly because cam options where limited for revup and everyone LOVED the BC2's at the time on the DE.
Check the FI section!
I just rem thinking I could have run a DE instead of my revup...mainly because cam options where limited for revup and everyone LOVED the BC2's at the time on the DE.
Check the FI section!