The question is, in the box there is a bag with some wires that in the manual is does not talk about. There are 4 different bags. There is a bag with the e-manage plug, injector harness that you put the pins in the plug for the e-manage, the rpm sensor wires and then in a the bag with a clear vac hose that has the extra wires.

 

Does it have a 12 pin harness on one end? If so then it would be the Ignition harness. Other than that I'm not sure.

 

I call Greddy and they told me that all the wires are there and the wires that i am talking about should not be in the kit. All the wires that the manual talk about are there but the extras i don't need. There is a set of wires that have the plug for the e-manage, and a set of wires that have the pins to go in the e-manage plug which is the injector harness, and the rpm sensor wires. That's all the wires that the manual talks about.

 

Well, it sounds like the wires you are talking about are the ignition harness. There should be 2 harnesses one that's a 12 pin (ignition) and the other is an 18 pin (main unit wires + injectors). The RPM adapter hooks to the brown wire in the main 18 wire harness.

-Chris