Test Pipes W/O vibration brackets/supports
Thread Starter
Registered User
iTrader: (19)
Joined: Apr 2008
Posts: 2,697
Likes: 3
From: Dirty Jersey
When i received my test pipes luckily they had the support brackets that the original cats have that mount up on the same bracket that attaches to the lower part of the transmission.
A buddy of mine has the Megan Racing test pipes in which only came with flex pipes as the next best thing. when it was on the alignment rack and he gassed it up you can see the whole system shake vigorously entailing a future break of the flex pipe sections.
So we made brackets that mount up to the existing bracket that mounts to the bottom of the trans.
Here are some pictures.





A buddy of mine has the Megan Racing test pipes in which only came with flex pipes as the next best thing. when it was on the alignment rack and he gassed it up you can see the whole system shake vigorously entailing a future break of the flex pipe sections.
So we made brackets that mount up to the existing bracket that mounts to the bottom of the trans.
Here are some pictures.





Trending Topics
Thread Starter
Registered User
iTrader: (19)
Joined: Apr 2008
Posts: 2,697
Likes: 3
From: Dirty Jersey
No prob.
Im not saying they may never break...just hindering the time frame i guess. not that i could not cut and weld in a new flex section, but this is some insurance on it.
Im not saying they may never break...just hindering the time frame i guess. not that i could not cut and weld in a new flex section, but this is some insurance on it.
Thread Starter
Registered User
iTrader: (19)
Joined: Apr 2008
Posts: 2,697
Likes: 3
From: Dirty Jersey
If you do you can always head over to megan racing site and purchase there 02 sensor extensions to cut the amount flow to the 02's for you. That would hinder an CEL.



