VTR & Momentum WILL PAY for your turbo kit install!!
Thread Starter
Vendor - Former Vendor
Joined: Nov 2010
Posts: 298
Likes: 0
From: Long Island, NY
VTR & Momentum WILL PAY for your turbo kit install!!
VTR & Momentum Performance will pay for your turbo kit install!
Just in time for the warm weather!
We have teamed up with Momentum Performance to
PAY FOR YOUR COMPLETE TURBO KIT INSTALL WITH DYNO TUNING
with the purchase of our Momentum Performance single turbo kit package for your 350z/G35!
For the price of $7,599.00 this package includes all of the following:
• Garrett GT35R with TiAL 1.03 A/R stainless v-band housing
• Intercooler: Custom high fin density bar and plate (9” x 22” x 3.25”)
• Wastegate: Tial MV-R
• Blow-off-valve: Tial Q 50mm
• Downpipe: 3” 304 stainless with spare O2 bung for wideband installation
• Up-pipe: 2 ¼ 304 stainless
• Intake/Charge Piping: 3” 6061 Aluminum with an integrated billet MAF housing
• Injectors: DeatschWerks 600cc plug & play (no adapter harness or spacers needed)
• Fuel Pump: Walbro 255H drop in fitment
• Tune: Up Rev flash package with basemap
• Coolant Surge Tank: Custom aluminum surge tank
• One step colder NGK Spark plugs (LFR6A-11)
• K&N Air filter (5”x7”)
• All the necessary hardware, couplers and clamps
• Polished or optional Powder Coated Intercooler and intake tubing (powder coating cost extra)
• Polished or optional Ceramic coated exhaust tubing
• INSTALLED AND DYNO TUNED BY VINNY TEN RACING
• Intercooler: Custom high fin density bar and plate (9” x 22” x 3.25”)
• Wastegate: Tial MV-R
• Blow-off-valve: Tial Q 50mm
• Downpipe: 3” 304 stainless with spare O2 bung for wideband installation
• Up-pipe: 2 ¼ 304 stainless
• Intake/Charge Piping: 3” 6061 Aluminum with an integrated billet MAF housing
• Injectors: DeatschWerks 600cc plug & play (no adapter harness or spacers needed)
• Fuel Pump: Walbro 255H drop in fitment
• Tune: Up Rev flash package with basemap
• Coolant Surge Tank: Custom aluminum surge tank
• One step colder NGK Spark plugs (LFR6A-11)
• K&N Air filter (5”x7”)
• All the necessary hardware, couplers and clamps
• Polished or optional Powder Coated Intercooler and intake tubing (powder coating cost extra)
• Polished or optional Ceramic coated exhaust tubing
• INSTALLED AND DYNO TUNED BY VINNY TEN RACING
Any questions please feel free to shoot me a private message.
http://www.youtube.com/watch?v=O-1oC6jVCWQ
http://www.youtube.com/watch?v=O-1oC6jVCWQ
Last edited by Brandon@VTR; Apr 18, 2011 at 01:23 PM.
Trending Topics
This is crazy. I would go buy a 10k$ used 350z just to take it to them and have this done. 18k for a sweet *** car. Another 3500$ if you put a built engine in it and have a 22k$ 500+hp car.
edit: i would do this if i was anywhere close to them. lol
edit: i would do this if i was anywhere close to them. lol
Thread Starter
Vendor - Former Vendor
Joined: Nov 2010
Posts: 298
Likes: 0
From: Long Island, NY
No we do not, sorry.
We talk about this all the time in the shop, how the z can be had in the low $20k range, fully built, with 500+hp reliably.
For those who are unfamiliar with VTR, check out our facebook link located in my signature to tour the shop and look at pictures/videos of installs and builds.
For those who are unfamiliar with VTR, check out our facebook link located in my signature to tour the shop and look at pictures/videos of installs and builds.
