Z1 Motorsports M-Spec 350Z Cold Air Intake Kit RACE or STREET Version




Ignition of cooler oxygen results in a greater charge of energy during the engine combustion process. The Z1 Motorsports M-Spec 350Z Cold Air Intake Kit takes advantage of this scientific rule by relocating the engine air filter away from the hot engine bay and retrieves fresh, cold air from in front of the radiator, thus providing more power to your 2003-2006 350Z!

The M-Spec 350Z Cold Air Intake Kit is constructed of a mandrel bent aluminum tubing, MIG welded, polished, and features an integrated MAF housing for greater airflow, weight reduction, streamlined aesthetics, and overall product performance.

Invigorate the sound of your VQ35DE engine with the M-Spec Cold Air Intake Kit with a deep growl in low RPMs and aggressive tone in higher RPMs.

Included in the assembly are custom-molded silicone couplers, ABA style hose clamps, and a reusable K&N air filter for durability. Unlike other cold air intakes, the M-Spec Cold Air Intake Kit mounts the K&N air filter at the highest point possible to avoid water consumption and hydro-locking the engine in wet conditions.

This kit is will not bolt on to G35 coupes & sedans without modification of the radiator core support to allow room for clearance of coupler and piping.

This Race Version is only intended for use with vehicles that have the ability to tune their Air / Fuel Maps. The diameter of the race version is larger than the diameter of the stock MAF housing creating a lean condition if the map is not corrected. DO NOT USE THIS INTAKE WITHOUT GETTING YOUR ECU TUNED!

You can find this M-Spec RACE Version HERE

You can find this M-Spec Street Version HERE

 

any dynos?

 

Unfortunately, we don't have any dyno runs of just these mods in particular. Normally the cars already have aftermarket exhaust, test pipes, etc. With supporting mods, it should be between 6-12 rwhp typically.

 

so what's the level two? hehe

 

Level 2 would be a new plenum, such as the Kinetix V+ or Velocity Manifold.

They can be found HERE.

 

is the spacer 1/2 inch?

 

Our spacer is angled, so it's thicker in the front than in the rear

 

i just picked it up this weekend and installed it... very nice!

 

Glad to hear, stop back by see us for a dyno tune to take full advantage of the intake system.

 

I need a tune bad i have the Kinetix, test pipes, tbs, pullies, exhaust and CAI. So i need it bad.....

 

this is a good deal as long as that is a quality filter. newbies need to jump on this.

 

yes, i think a tune would be good. can you pm some information? prices?
thanks

 

If you're looking to upgrade the performance on your 350Z or G35, this package is a great starting point.

 

We also sell these items individually, in case you have one of these parts already on your car.

 

I sent you a PM a few days ago with some questions and some parts that I need.

I feel like I got a computer generated generic response that picked out one word of my PM and answered none of my questions.

Can you please review your PM's and try to answer my questions. I would like to order some parts, but I would like a more personal response.

Z1 Why you no care about me?

 

how much for just the ztube shipped? its exact same as the oem z tube? wanna get rid of my black ztube for a polished

 

I assure you that the response you received was not a generic response. Unlike other vendors, our website is configured to give our customers on demand shipping quotes 24/7, eliminating the need to PM for prices. If you would like a personalized quote over the phone, please give our parts department a call and we will gladly assist you further. 770-838-7777 press 1 for parts.

Thanks again.

 

These kits are in stock and ready to ship.

 

Improve the response of your Z today!

 

Pick up your kit today!