FS: 350z - VK56 Swap Setup
07-20-2011, 01:46 PM
#1
Registered User
Thread Starter
iTrader: (10)
Join Date: Feb 2006
Location: WNY
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
350z - VK56 Swap Setup
For sale, the parts to my '03 350z - VK56 Swap. I'm not really interested in separating components, but there are some major bits I'd split up (ViPEC V88, RacePak IQ3, ATS Clutch) as I know I can unload those parts easily.
(some items may NOT be pictured, I tried to include most things in the photos)
Build thread:
https://my350z.com/forum/engine-and-...pped-350z.html
Build thread photos:
Videos:
URL:
http://vimeo.com/14470732
Dyno Vid:
http://vimeo.com/14260790
Free Revs:
http://vimeo.com/14202573
Vk56/350z mounts
Vk56/350z 6 speed adapter plate
Vk56/350z starter adapter plate for use with standard 350z starter and clutch options
Vk56/350z headers
Vk56/350z full exhaust
350z starter
350z alternator
350z 6 speed trans with modified bellhousing for starter and machined for adapter plate and clutch integration
Custom CNC'd shorter shift selector housing
Shortened shift linkage
Cut VK56 Accessory mount for 350z Alternator
Oil cooler
Oil cooler mount
-10 Oil Cooler lines
Remote Oil Filter Block
Remote Oil filter block (engine side) for -10 fittings
Nismo Shifter
Custom radiator with paddle fans
Driveshaft shop
Shortened bomb proof oil pan
Crank Pulley tapped for 60-2 trigger wheel
Custom Mid Pipe exhaust connected to HKS Knockoff rear section
Water pipe extension to keep lower rad hose against engine away from fans and belts
What you will need to acquire/create yourself:
VK56DE
Clutch/Flywheel
Shortened oil pickup tube
Trans mount (I'll include an OEM one so you can line something up to the stock mounting points. You can either drill your OEM floor for that or create something nice and new).
The last two items are because I lost them while moving from Buffalo to the NYC area over the winter.
SHIPPING AT BUYERS EXPENSE. I will package up the smaller components in separate boxes and put them on a pallet with the larger components. I accept paypal or cash. Items are located in the N.NJ / NYC area.
I'm looking for $6k for everything NOT INCLUDING SHIPPING.
(some items may NOT be pictured, I tried to include most things in the photos)
Build thread:
https://my350z.com/forum/engine-and-...pped-350z.html
Build thread photos:
Videos:
URL:
http://vimeo.com/14470732
Dyno Vid:
http://vimeo.com/14260790
Free Revs:
http://vimeo.com/14202573
Vk56/350z mounts
Vk56/350z 6 speed adapter plate
Vk56/350z starter adapter plate for use with standard 350z starter and clutch options
Vk56/350z headers
Vk56/350z full exhaust
350z starter
350z alternator
350z 6 speed trans with modified bellhousing for starter and machined for adapter plate and clutch integration
Custom CNC'd shorter shift selector housing
Shortened shift linkage
Cut VK56 Accessory mount for 350z Alternator
Oil cooler
Oil cooler mount
-10 Oil Cooler lines
Remote Oil Filter Block
Remote Oil filter block (engine side) for -10 fittings
Nismo Shifter
Custom radiator with paddle fans
Driveshaft shop
Shortened bomb proof oil pan
Crank Pulley tapped for 60-2 trigger wheel
Custom Mid Pipe exhaust connected to HKS Knockoff rear section
Water pipe extension to keep lower rad hose against engine away from fans and belts
What you will need to acquire/create yourself:
VK56DE
Clutch/Flywheel
Shortened oil pickup tube
Trans mount (I'll include an OEM one so you can line something up to the stock mounting points. You can either drill your OEM floor for that or create something nice and new).
The last two items are because I lost them while moving from Buffalo to the NYC area over the winter.
SHIPPING AT BUYERS EXPENSE. I will package up the smaller components in separate boxes and put them on a pallet with the larger components. I accept paypal or cash. Items are located in the N.NJ / NYC area.
I'm looking for $6k for everything NOT INCLUDING SHIPPING.
Last edited by MPD47; 07-22-2011 at 09:21 AM.
Word is the next Z will have the VK in it but no solid proof yet.
Trending Topics
07-21-2011, 05:30 PM
#11
Former Sponsor
iTrader: (564)
Join Date: Feb 2003
Location: Long Island, New York
Posts: 19,266
Likes: 0
Received 5 Likes
on
5 Posts
Def a car with a lot of work put into it
I'd love to know if you ever figured out how to get fuel level to work
That's the only thing I have not finished on my cluster integration
I'd love to know if you ever figured out how to get fuel level to work
That's the only thing I have not finished on my cluster integration
07-21-2011, 07:08 PM
#12
Registered User
Thread Starter
iTrader: (10)
Join Date: Feb 2006
Location: WNY
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Adam, I feel like I thought up some way to make the integration work but never tested it. Let me look back in my build notes and see if I can find something. I'll let you know. I'm local now too so if I figure it out I can come over and try it out. Been wanting to check out your build since Mike M told me about it.
07-22-2011, 09:21 AM
#14
Registered User
Thread Starter
iTrader: (10)
Join Date: Feb 2006
Location: WNY
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
I've separated out the ViPEC, Racepak IQ3, and ATS clutch. This is now JUST the swap parts at a significantly cheaper price, which I am negotiable on.
07-29-2011, 09:23 PM
#16
Iq3 for sale? Sorry, I just got back from work and am way tired and out of it so I'm not sure if you're saying u took it out to not sell it, or if you're selling it. I'm def interested. Like, mean interested 
Good luck w/ the rest of the sale, I say rest cuz if u got it and are selling it, that iq3 is mine lol
Good luck w/ the rest of the sale, I say rest cuz if u got it and are selling it, that iq3 is mine lol
