FS: Big Power!! Sleeved block,ported heads,billet Bc crank,carillo rods & je pistons
#1
New Member
Thread Starter
iTrader: (1)
Join Date: Nov 2012
Location: Hesperia
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Big Power!! Sleeved block,ported heads,billet Bc crank,carillo rods & je pistons
As the title states If you want big power here is your chance to come up. Im not gonna end up using this stuff as I have a r33 gtr I will be focusing on. I bought this as a package deal a couple years ago from someone who had the work done and as I'm doing, went with another project.
The following parts are new or machined and have not been used or installed. This kit was made to fit together so I'm selling it all together unless I get buyers for each item. Buyer pays shipping Ill cover paypal. local 9095441954.
$8000.
Parts were for my 03 350z. They are for the vq35de.
1) Machined and Sleeved Block with head studs. Note some nuts missing from the Arp studs.
2) Two Port n polished heads with bigger valves, I beleive they are super tech 1mm bigger with upgraded springs. The cams that come with it are some early 272 cams that I'm not sure who makes them as there aren't any part numbers just specs. Im guessing tomei.
3) Brian Crower billet crank 4.1 liter 88mm stroke.
4) Carillo rods.
5) Je pistons.
Thanks for looking.
The following parts are new or machined and have not been used or installed. This kit was made to fit together so I'm selling it all together unless I get buyers for each item. Buyer pays shipping Ill cover paypal. local 9095441954.
$8000.
Parts were for my 03 350z. They are for the vq35de.
1) Machined and Sleeved Block with head studs. Note some nuts missing from the Arp studs.
2) Two Port n polished heads with bigger valves, I beleive they are super tech 1mm bigger with upgraded springs. The cams that come with it are some early 272 cams that I'm not sure who makes them as there aren't any part numbers just specs. Im guessing tomei.
3) Brian Crower billet crank 4.1 liter 88mm stroke.
4) Carillo rods.
5) Je pistons.
Thanks for looking.
Last edited by qew; 10-19-2016 at 11:16 AM. Reason: Application
#4
New Member
Thread Starter
iTrader: (1)
Join Date: Nov 2012
Location: Hesperia
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
I'm almost 100% sure the cams are early versions of the tomei pro cams because they offer 11.3 lift on their intake cams. While the exhaust is 11.0 lift.
Last edited by qew; 09-23-2016 at 03:08 AM.
#6
New Member
Thread Starter
iTrader: (1)
Join Date: Nov 2012
Location: Hesperia
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
I don't think these cams were ever ran, they look new. I have more pictures in detail of the cams that show no wear on the lobes nor the journal areas. Im almost certain the springs are also upgraded as I currently run 272 jwt c8 cams with recommended upgraded springs on my single turbo z, which I purchased before running across this stuff a few years ago. I can send you the pictures if you'd like just text me. They have some stamps on them too. But nothing significant such as a part number.
I had this same issue with some hks cams that came on my rb26 engine in my r33 Gtr. I was in contact with hks in emails but at least I believe those had an hks stamp, lift, duration etc. but no part number and I wanted the cam card but in the end couldn't get an exact card for those specific specs it has stamped. I ended going with new hks cams with a higher 272 duration but at a lower lift compared to what was on the other cams.
I had this same issue with some hks cams that came on my rb26 engine in my r33 Gtr. I was in contact with hks in emails but at least I believe those had an hks stamp, lift, duration etc. but no part number and I wanted the cam card but in the end couldn't get an exact card for those specific specs it has stamped. I ended going with new hks cams with a higher 272 duration but at a lower lift compared to what was on the other cams.
Last edited by qew; 09-23-2016 at 06:40 AM.
Trending Topics
#10
New Member
Thread Starter
iTrader: (1)
Join Date: Nov 2012
Location: Hesperia
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Bump.. Info update pistons are custom 9.0:1 compression. Didn't say on the box,had some interest and contacted je pistons and found that out. Kit makes engine 4.1 liter.6800.
#11
New Member
Thread Starter
iTrader: (1)
Join Date: Nov 2012
Location: Hesperia
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Bump... reasonable offers considered,prefer to get it sold as a set,the sleeves are already bored for these custom 9:0;1 pistons and everything is ready for assembly and make big power.
#15
New Member
Thread Starter
iTrader: (1)
Join Date: Nov 2012
Location: Hesperia
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
I'll pm u. Well that's bidders on the the block ,crank n rods. Bored to 3.9". Bored to fit those je pistons.
Any takers on the heads with cams and springs and the je pistons?
Any takers on the heads with cams and springs and the je pistons?
#18
New Member
Thread Starter
iTrader: (1)
Join Date: Nov 2012
Location: Hesperia
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Logiqal. Rods are niq35 65676s00. Go for over 1500 new, which they are but will be less tag that if I sell em.
People who interested I have responded by pm to all your requests. Heads are spoken for as I've verified and spoke to the member Snitkercms on the phone I f I split everything up.Counter offer something fair, if I don't get responses by the end of this week I will sell to someone interested in the whole package so make your offers, make your moves. Thank u all for your interest.
People who interested I have responded by pm to all your requests. Heads are spoken for as I've verified and spoke to the member Snitkercms on the phone I f I split everything up.Counter offer something fair, if I don't get responses by the end of this week I will sell to someone interested in the whole package so make your offers, make your moves. Thank u all for your interest.