View Poll Results: Nismo Ver.2 bumper set-up
Install Ver.2 bumper with BLACK canards
116
48.74%
Install Ver.2 bumper with SILVER canards
23
9.66%
Install Ver.2 bumper WITHOUT canards
69
28.99%
DO NOT install Ver.2 bumper, keep it stock
13
5.46%
Other......Nismo Ver.2 sucks
17
7.14%
Voters: 238. You may not vote on this poll
NISMO V2 bumper arrived *PICS*
Originally Posted by Jason@Performance
we have 19" LMGT4's available as well as the 18" ....
our new site will be launching very soon... (FIANNAFREGGINLY)
any other size that is not regularly available for the 350Z is about twice as much... 19x10.5 +15mm if i remember off the top of my head...
our new site will be launching very soon... (FIANNAFREGGINLY)
any other size that is not regularly available for the 350Z is about twice as much... 19x10.5 +15mm if i remember off the top of my head...
That nismo V2 is HOT
but in the research i have done, i found it to be the "Golden" fiberglass bumper at almost $2000.. i was going to purchase that bumper to go with my nismo kit.. but found it rediculous for the following reasons
1. I dont go well with fiberglass, my experience is you can barely drive with it and if you do you must be careful as hell!
2. Right now there isnt too many dealers or vendors that supply this kit, therefore price will be sky high!
3. In a few years price will go down because frauds will make molds that will sell as good or better therefore reducing NISMO's outrageous price on the V2
It looks SICK though!!
but in the research i have done, i found it to be the "Golden" fiberglass bumper at almost $2000.. i was going to purchase that bumper to go with my nismo kit.. but found it rediculous for the following reasons1. I dont go well with fiberglass, my experience is you can barely drive with it and if you do you must be careful as hell!
2. Right now there isnt too many dealers or vendors that supply this kit, therefore price will be sky high!
3. In a few years price will go down because frauds will make molds that will sell as good or better therefore reducing NISMO's outrageous price on the V2
It looks SICK though!!
Registered User
Joined: Sep 2004
Posts: 445
Likes: 1
From: Sweden
Originally Posted by DIMERYDER
my nismo v2 bumper just arrived and i can't wait to get it painted and installed. the bumper and lip will be painted chrome silver to match my car and the opening will be painted super black. the mesh grille and intake duct will remain black. i'm debating whether or not to install the canards [the wings on the corners of the bumper]. if i do decide to install the canards, what color should they be? chrome silver or super black?
My thinking was that if the grille comes out to much in red i can always paint that part over with black afterwards, though the idea is that the black mesh behind would create the proper balance (i bought a new mesh that covers all of the grille and not separate for the center and sides like it comes from Nismo for some reason).
/Roger
Last edited by Roggan; May 13, 2006 at 08:17 AM.
Originally Posted by jonb7007
That nismo V2 is HOT but in the research i have done, i found it to be the "Golden" fiberglass bumper at almost $2000.. i was going to purchase that bumper to go with my nismo kit.. but found it rediculous for the following reasons
1. I dont go well with fiberglass, my experience is you can barely drive with it and if you do you must be careful as hell!
2. Right now there isnt too many dealers or vendors that supply this kit, therefore price will be sky high!
3. In a few years price will go down because frauds will make molds that will sell as good or better therefore reducing NISMO's outrageous price on the V2
It looks SICK though!!
but in the research i have done, i found it to be the "Golden" fiberglass bumper at almost $2000.. i was going to purchase that bumper to go with my nismo kit.. but found it rediculous for the following reasons1. I dont go well with fiberglass, my experience is you can barely drive with it and if you do you must be careful as hell!
2. Right now there isnt too many dealers or vendors that supply this kit, therefore price will be sky high!
3. In a few years price will go down because frauds will make molds that will sell as good or better therefore reducing NISMO's outrageous price on the V2
It looks SICK though!!
]. Why would you go with JDM sides and rears vs USDM parts? Then only the front bumper is FRP with the rest urethane. Any thoughts? Btw - Roggan is doing his with all JDM parts too. The Swede's Redline is gonna look fire hot!
Originally Posted by DIMERYDER
also getting 19"lmgt4's with aggressive offset. ordered JDM nismo bodykit.
Sorry to be off topic, but does anybody know the rear wheel's offset on the red car?
Thanks!
Last edited by MajorWoody; May 13, 2006 at 08:17 AM.
Guest
Posts: n/a
Originally Posted by MajorWoody
https://my350z.com/forum/attachment....4&d=1147502056
Sorry to be off topic, but does anybody know the rear wheel's offset on the red car?
Thanks!
Sorry to be off topic, but does anybody know the rear wheel's offset on the red car?
Thanks!
ill have to check to be sure but i believe it is +23
Originally Posted by Roggan
Hey dude, as you might have seen im installing my V2 next week (picking up the bodykit from the paintshop on Monday), i went with everything in the cars color (red in my case), so depending on how that turns out i guess it might help you with your decision, im posting some high res pics mid/end next week on the results.
My thinking was that if the grille comes out to much in red i can always paint that part over with black afterwards, though the idea is that the black mesh behind would create the proper balance (i bought a new mesh that covers all of the grille and not separate for the center and sides like it comes from Nismo for some reason).
/Roger
My thinking was that if the grille comes out to much in red i can always paint that part over with black afterwards, though the idea is that the black mesh behind would create the proper balance (i bought a new mesh that covers all of the grille and not separate for the center and sides like it comes from Nismo for some reason).
/Roger
Originally Posted by Bill_the_Cat
You guys should try www.japanparts.com. I am thinking of the v2 bumper as well to go along the USDM sides and rears. Japanparts currently list this bumper for US $883.44 with a 20-30 day shipping ETA. I haven't ordered anything yet [stilll getting over the Z purchase ]. Why would you go with JDM sides and rears vs USDM parts? Then only the front bumper is FRP with the rest urethane. Any thoughts?
Btw - Roggan is doing his with all JDM parts too. The Swede's Redline is gonna look fire hot!
]. Why would you go with JDM sides and rears vs USDM parts? Then only the front bumper is FRP with the rest urethane. Any thoughts? Btw - Roggan is doing his with all JDM parts too. The Swede's Redline is gonna look fire hot!
as for JDM vs. USDM, besides being different material, they look different. look closely and you will notice that the JDM sides are less flared out than the USDM sideskirts. i like the JDM version for my Z, lines seem to match better with the bumper lip.
here are pics: 1. JDM 2. USDM
Originally Posted by DIMERYDER
did you check the shipping cost from japanparts? i did, and it came to $600 to ship to my area. did you also add the price of canards? pretty much same cost as purchasing from performance nissan.
as for JDM vs. USDM, besides being different material, they look different. look closely and you will notice that the JDM sides are less flared out than the USDM sideskirts. i like the JDM version for my Z, lines seem to match better with the bumper lip.
here are pics: 1. JDM 2. USDM
as for JDM vs. USDM, besides being different material, they look different. look closely and you will notice that the JDM sides are less flared out than the USDM sideskirts. i like the JDM version for my Z, lines seem to match better with the bumper lip.
here are pics: 1. JDM 2. USDM
I see your point about the sides. The JDM part has softer lines. Thanks for the info. I'm eagerly awaiting you and Roggan to finish up and show us them beautiful Z bodies. Get her done!
psychedelic one
Joined: Nov 2005
Posts: 3,084
Likes: 1
From: In-A-Gadda-Da-Vida
Unless you are going to put on a lot of other black pieces, I think that the offset colors (silver/black) might look odd. I voted for all one color- looks very cool just like that.
Guest
Posts: n/a
Originally Posted by ChinaClipper
Is the V2 only available from Japan right now?
Officially yes, but there are some vendors on here that you can get it from.
nismo is supposed to release a USDM lip in the near future. but you wont see this V2 bumper ever as a USDM product
Originally Posted by Roggan
I vote for a complete one color look, everything silver like the latest official Nismo car.
Just got my kit back from the paintshop, very pleased with the one color decision.
/Roger
Just got my kit back from the paintshop, very pleased with the one color decision.
/Roger
