My Z33"R" Install!
Thread Starter
Registered User
Joined: Apr 2008
Posts: 14
Likes: 0
From: seattle, WA
My Z33"R" Install!
Hi guys,
I have finally finished my car and had some time to write up a review for the Weber Sport body kit install as some of you have requested in my previous post.
https://my350z.com/forum/exterior-in...-body-kit.html
Overall, I am very pleased with the result and I have to thank everyone who helped, especially aero R for providing this kit at such a reasonable price! $950 instead of ~$3000 from Japan!
The kit fits onto the car with very little effort, but, it doesn't come pre-drilled. Whoever installs it does have to line up the pieces and have the holes drilled wherever necessary. Since mine is the hardtop model Z, they only offered a half add-on apron for the rear bumper. In order to make it perfectly to my standard and be able to remove it in the future if I want to, I did ask my installer to touch up the edges for the rear apron as you can see in the following picture. The surface finish and built quality of the fiberglass looked good to me and I didn't get any complaint or extra charges from my installer. 
I have also included a picture of my friend's orange z with the same kit and a picture of my car beside the new GT-R when I went back to Nissan for service!....HMMMM....I think this kit resembles the pre-production concept model more, which in my opinion has a clearer and sharper look.
The quality of these pictures are not very good and do not do the justice of actually how good the car looks in person. Whenever my wife and I switch cars and I get to see how it run on the street, the impact and the attention of this kit always bring a smile to my face! (If you understand what I mean...hehe) Anyways, just thought to share this with you guys.
I have finally finished my car and had some time to write up a review for the Weber Sport body kit install as some of you have requested in my previous post.
https://my350z.com/forum/exterior-in...-body-kit.html
Overall, I am very pleased with the result and I have to thank everyone who helped, especially aero R for providing this kit at such a reasonable price! $950 instead of ~$3000 from Japan!
The kit fits onto the car with very little effort, but, it doesn't come pre-drilled. Whoever installs it does have to line up the pieces and have the holes drilled wherever necessary. Since mine is the hardtop model Z, they only offered a half add-on apron for the rear bumper. In order to make it perfectly to my standard and be able to remove it in the future if I want to, I did ask my installer to touch up the edges for the rear apron as you can see in the following picture. The surface finish and built quality of the fiberglass looked good to me and I didn't get any complaint or extra charges from my installer. I have also included a picture of my friend's orange z with the same kit and a picture of my car beside the new GT-R when I went back to Nissan for service!....HMMMM....I think this kit resembles the pre-production concept model more, which in my opinion has a clearer and sharper look.
The quality of these pictures are not very good and do not do the justice of actually how good the car looks in person. Whenever my wife and I switch cars and I get to see how it run on the street, the impact and the attention of this kit always bring a smile to my face! (If you understand what I mean...hehe) Anyways, just thought to share this with you guys.
Last edited by thomasZZZZZ; Aug 20, 2008 at 04:27 PM.
Not bad but too much chicken wire I think... and the extra air inlet at the top makes it look like every other body kit on a Civic. Kind of takes away the unique look of the Z. But I kinda like the blacked out GTR look, sort of.... still iffy on it.
Trending Topics
not a fan.
No props for that kit. Maybe if you had a authentic Weber, but no, it's a knockoff.
Reminds me of the girls at the Scottsdale mall in AZ that carry knock off Luis purses.
Reminds me of the girls at the Scottsdale mall in AZ that carry knock off Luis purses.
