4 point roll bar installed pics.
Thread Starter
Registered User
Joined: Jun 2002
Posts: 51
Likes: 0
From: greensboro, nc
4 point roll bar installed pics.
i had this bar made by kirk racing. they will be selling the four point bar for around 325 and you can have the rear diagonals ran differently but with the rear bars in the x pattern you have full seat reclinability, and yes my seat slides all the way back. all of the storage bins open with no problem. i am 6'3" and 250lbs and do not even notice the bar is in their even with a helmet on but the passinger will, they lose about 5" of seat travel. they do offer a full cage also. kirk racing 1-205-608-1156
btw we are running vir sept. 20-21 so come check out the bars. we will have two 350's with bars in them thanks.
btw we are running vir sept. 20-21 so come check out the bars. we will have two 350's with bars in them thanks.
Trending Topics
Thread Starter
Registered User
Joined: Jun 2002
Posts: 51
Likes: 0
From: greensboro, nc
the car feels alot more solid but i did not drive it long with just the bar in, i installed s-tunes and cusco's sway's two days after the bar went in. i have about 3.5" from the padding on my bar from my head with out a helmet on and the bar is only about 2" above my head. i will try to get more pics sometime my camera got droped and the pics are pretty fuzzy now.
Thread Starter
Registered User
Joined: Jun 2002
Posts: 51
Likes: 0
From: greensboro, nc
i would have to take the seats and carpet back out and that ain't going to happen. it mounts right up aginst the rear bins. if you reach behind your seat and push down the carpet you can feel a low area about 3" wide and 8" long, thats where it mounts. you can call kirk racing, i belive they took alot of pics when making the bar. and it only takes about two hours to install.
Thread Starter
Registered User
Joined: Jun 2002
Posts: 51
Likes: 0
From: greensboro, nc
the bar is scca legal thats why i got it ( for solo 1 ). and the bar comes in flat or gloss black. i had mine painted at a local body shop while i was down in alabama getting the bar made.
Banned
Joined: May 2002
Posts: 13,063
Likes: 0
From: Smackahoe Blvd
Please post pics with you sitting in the car, helmet on! I need that bar ASAP, but my head already hits the roof of the car with a helmet on and I sit with the seat 1 click from all the way back, but I don't sit extrememly reclined. I am worried about my head hitting that bar. Thanks!
Registered User
Joined: Jan 2003
Posts: 694
Likes: 0
From: Alamo, CA
The bar looks great. I've been looking for a nice looking bar for the Z.
I'd like to see you sitting in the car also. Looking at the pictures, it would seem that someone 6'3" would have to lean his helmet forward to clear the bar. Must be the angle of the picture.
I'm 6'1" and I barely clear the ceiling with a helmet on. Two other Z owners at the autocross who are an inch or so taller say that their helmet touches the ceiling although they don't notice when they drive.
Does Kirk have a web site? or do we reach them just by phone?
I'd like to see you sitting in the car also. Looking at the pictures, it would seem that someone 6'3" would have to lean his helmet forward to clear the bar. Must be the angle of the picture.
I'm 6'1" and I barely clear the ceiling with a helmet on. Two other Z owners at the autocross who are an inch or so taller say that their helmet touches the ceiling although they don't notice when they drive.
Does Kirk have a web site? or do we reach them just by phone?
Registered User
Joined: Oct 2002
Posts: 804
Likes: 0
From: Las Vegas, NV
With the cross braces, it looks like your view out the rear view mirror has gone from poor to zilch.
If you're taking more pix for all the rest of the guys above, can you try to get one of the view through the mirror?
If you're taking more pix for all the rest of the guys above, can you try to get one of the view through the mirror?
