problem with driver side headlight
ok so my driver side headlight is always fogged up with condensation and whatnot.
im not sure what i should do to make it clear again, any ideas?
thanks
im not sure what i should do to make it clear again, any ideas?
thanks
This issue is pretty common with 350z headlights. Your options are to live with it, replace the entire headlight (very pricey) , or remove the lense and reseal it. Here is a link with instructions on resealing the headlight if you are so inclined https://my350z.com/forum/body-interi...eadlights.html
I would pull the headlight and check the seal of the dust cap in the back. You might actually pull the cap off and reseat it.
Just a note on the DIY, if you decide to do it, watch for the sealant becoming stringy, have something like a small knife or a razor blade to cut through the strands as you separate the lense from the housing.
If you don't cut those strands, they can end up landing on the inside of the housing.
Just a note on the DIY, if you decide to do it, watch for the sealant becoming stringy, have something like a small knife or a razor blade to cut through the strands as you separate the lense from the housing.
If you don't cut those strands, they can end up landing on the inside of the housing.
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
Aug 6, 2021 06:19 AM
ars88
Zs & Gs For Sale
18
Apr 4, 2016 07:52 AM




