Check out my new interior project!!!!!!
#1
New Member
Thread Starter
iTrader: (9)
Join Date: Jan 2009
Location: Bossier City, La.
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Check out my new interior project!!!!!!
ok for people that have seen my Z i am finishing up wrapping the interior in red and black seude here are the pics i did this morning wrapped the whole back and added cf in the rear strut bar. ill be finishing up the headliner tomorrow or monday it will be red with a scropion outline. I dont post on here much i spend more of my time on the evo site since im building both cars right now. AS SOON AS EVO IS DONE THE Z WILL GO UNDER THE KNIFE WITH JMS for all the engine mods i have in storage. here interior pics ill post the headliner once done.
Trending Topics
#15
New Member
Thread Starter
iTrader: (9)
Join Date: Jan 2009
Location: Bossier City, La.
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
lol i plan on getting brides or another company grey seats with read stiching in it to be honest after this its motor time installing my 14" wilwood front and rear brakes, aps twin turbo kit, built shortblock, im looking into built heads right now as well other stuff i got.
#16
New Member
Thread Starter
iTrader: (9)
Join Date: Jan 2009
Location: Bossier City, La.
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
I have a hood prop holding it up you can see it in the pic. shocks will not fit under there cf trunk i have with a apr gtc 300 spoiler. already tried lol this is the best method for 25 dollars
3mm product uber strong adhesive ill get the exact name for you when i got back to the work house
posted pics of evo and built motor going in it now at the bottom and pics of Z.
rockford fostgate capacitor for my sound system. its not needed as im pushing alot of power but i got it for design and more to look at
its bubbling alittle bit due to the heat we have here in LA i dont have my back glass tinted but front is. so ill take it off and redo it later
rockford fostgate capacitor for my sound system. its not needed as im pushing alot of power but i got it for design and more to look at
its bubbling alittle bit due to the heat we have here in LA i dont have my back glass tinted but front is. so ill take it off and redo it later
#17
New Member
Thread Starter
iTrader: (9)
Join Date: Jan 2009
Location: Bossier City, La.
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
fully built 2.4 evo in progress right now i have alot of parts i custom made like the manifold for example chameleon valve cover headlights taillights etc
Lets get the list of mods over with
Mike@AwdMotorsports built head(came off his 9sec car {thumbup}
-Custom dual springs and titanium retainers
-Angular port and Polish job
-Oversized Valves
-Redecked
Motor- Rx 2.4 Shortblock
-Acl bearings
-Manley I-beam Rods
-ARP main studs
-Wiseco Pistons
-4g64 crank
-Balance Shaft Eliminator
-Fluidampr
Ported Fp Black (TiradoCustomCoatings coated)
Fp Evo 8 to 9 install kit with 3" Turbo pipe
Mona Lisa Manifold (TiradoCustomCoatings coated)
Ebay ported SS o2 housing (TiradoCustomCoatings)
3" Perrin Downpipe
Perrin Oil Catch Can
Perrin Fuel Rail
3" Invidia N1 Exhaust system
Testpipe
Mishimoto Radiator
JesseB custom radaitor hoses
PTE 1000cc injectors
AMS Replacement Fuel Line
PPI Extreme Ported Intake manifold
Sharkbite Milspec 65mm Throttle Body
Injen Intake
Injen Intercooler pipping
APS Twin Vent bov
APS 3.5" Intercooler
AEM True Boost guage
Aem Oil pressure guage
Innovate Wideband
Forge Manuel Boost Controller
Exedy twin Carbon clutch
Exedy twin Clutch( yes i have two of them did not know my car had one installed)
Fp 4pr Cams
Slowboy Racing Timing belt
OEM Serpintine belt
Slowboy Racing Water Pump Adaptor Plate
Fidanza Red camgears
JMS Racing Double PUMPER
ARP Undercut Headstuds
Ams Custom 4g64 (2.4) Headgasket
Steel Braided Brake Lines
52mm Triple Apiller
Greddy Chrome Oil Cap
Chameleon Valve cover
OEM oil pan
GT Spec Chrome Front Strut Bar
Weapon R Powersteering Tank
Weapon R Coolant Overflow Tank
Lets get the list of mods over with
Mike@AwdMotorsports built head(came off his 9sec car {thumbup}
-Custom dual springs and titanium retainers
-Angular port and Polish job
-Oversized Valves
-Redecked
Motor- Rx 2.4 Shortblock
-Acl bearings
-Manley I-beam Rods
-ARP main studs
-Wiseco Pistons
-4g64 crank
-Balance Shaft Eliminator
-Fluidampr
Ported Fp Black (TiradoCustomCoatings coated)
Fp Evo 8 to 9 install kit with 3" Turbo pipe
Mona Lisa Manifold (TiradoCustomCoatings coated)
Ebay ported SS o2 housing (TiradoCustomCoatings)
3" Perrin Downpipe
Perrin Oil Catch Can
Perrin Fuel Rail
3" Invidia N1 Exhaust system
Testpipe
Mishimoto Radiator
JesseB custom radaitor hoses
PTE 1000cc injectors
AMS Replacement Fuel Line
PPI Extreme Ported Intake manifold
Sharkbite Milspec 65mm Throttle Body
Injen Intake
Injen Intercooler pipping
APS Twin Vent bov
APS 3.5" Intercooler
AEM True Boost guage
Aem Oil pressure guage
Innovate Wideband
Forge Manuel Boost Controller
Exedy twin Carbon clutch
Exedy twin Clutch( yes i have two of them did not know my car had one installed)
Fp 4pr Cams
Slowboy Racing Timing belt
OEM Serpintine belt
Slowboy Racing Water Pump Adaptor Plate
Fidanza Red camgears
JMS Racing Double PUMPER
ARP Undercut Headstuds
Ams Custom 4g64 (2.4) Headgasket
Steel Braided Brake Lines
52mm Triple Apiller
Greddy Chrome Oil Cap
Chameleon Valve cover
OEM oil pan
GT Spec Chrome Front Strut Bar
Weapon R Powersteering Tank
Weapon R Coolant Overflow Tank
Last edited by Dustman; 07-04-2010 at 12:02 PM.
#18
New Member
Thread Starter
iTrader: (9)
Join Date: Jan 2009
Location: Bossier City, La.
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Before anybody asks here is pics of my 350z enjoy
custom splitter i wrapped in carbonfiber
interior(this is before i did the seude wrap you see above)
parts i have not installed on my Z jms will
aps twin turbo kit and Willwood big brake kit with 14" rotors
custom made underpanel plate
main cars chilling(this is before i did heads and tails on evo) also custom xbox 360 i had made for the evo for carshows
custom splitter i wrapped in carbonfiber
interior(this is before i did the seude wrap you see above)
parts i have not installed on my Z jms will
aps twin turbo kit and Willwood big brake kit with 14" rotors
custom made underpanel plate
main cars chilling(this is before i did heads and tails on evo) also custom xbox 360 i had made for the evo for carshows