Passenger Door Handle Bolt Identification
#1
Registered User
Thread Starter
Passenger Door Handle Bolt Identification
I finally picked up a passenger side door handle for my Z so Passengers can actually close the damn door. But There is a catch, I have no bolts to connect the handle to the door. The bolt in question is this one
I already tried to find the bolt, a door schematic, but no luck. If you would be able to help identify this bolt it would be greatly appreciated.
Thanks,
Zax
I already tried to find the bolt, a door schematic, but no luck. If you would be able to help identify this bolt it would be greatly appreciated.
Thanks,
Zax
#2
General & Tech Moderator
MY350Z.COM
MY350Z.COM
Here's the schematic, bolts are not listed but might be included with new purchase. The link has the phone number at the top.
Worst case, measure the distance on each "tunnel" from where the bolt head seats and add 6mm or so to be sure it threads up. Guessing M8 1.00 IIRC. Ace Hardware.
http://www.courtesyparts.com/auto-pa...trim-door-scat
Worst case, measure the distance on each "tunnel" from where the bolt head seats and add 6mm or so to be sure it threads up. Guessing M8 1.00 IIRC. Ace Hardware.
http://www.courtesyparts.com/auto-pa...trim-door-scat
The following users liked this post:
Zax (08-31-2016)
Thread
Thread Starter
Forum
Replies
Last Post
DarkCreep
SoCal Marketplace
0
07-12-2016 07:14 PM