SES codes?
Engine codes 1273 and 1284 keeps popping up. I keep clearning them and they keep coming back. I did a search and nothing came up for 1273. Only 1 thread had something about 1284. I checked the O2 plugs on the bung on the exhaust pipe and they are still there. What is wrong?
the 1273 means that the ecu is seeing a lean signal from the 02 sensor on bank 1 (passenger side, front 02 sensor). 1284 is a rich signal being sent to the ecu from the drivers side front 02 sensor. i had a mechanical problem that made this happen, and it didn't set any codes for me. i am guessing you have a bad 02 on one of the sides. only way to know for sure is to read all the voltages at idle. you can do this with the consult 2 or if you know the wires, you can test it yourself with a multimeter and compare the data from all 4 sensors. the rear 02 sensors are more of a redundant sensor to double check the first 02 sensors. check them all and find the one giving a crazy reading. or go to the dealer and they can figure it out in a few seconds, lol. good luck
Originally Posted by taurran
His other post says he is running a turbonetics kit. O2 spacers shoudn't be an issue.
Trending Topics
Originally Posted by overZealous1
nice looking ride taurran, like the non-body kit in the weeds look, if ya couldn't tell on mine, hahaha.
Yeah, I hear ya. Although if I ran over a weed I think it would tear my front bumper off!
Thread
Thread Starter
Forum
Replies
Last Post
etkms
Engine & Drivetrain
29
Jun 19, 2022 06:30 PM
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM
350Z Project X
Maintenance & Repair
11
Oct 17, 2015 05:16 PM



