SVRTech wastegate dumps installed, review, pics and VIDEO!
Thread Starter
Registered User
iTrader: (12)
Joined: Jul 2004
Posts: 2,311
Likes: 0
From: Raleigh, NC
So I got my relocation and dump tubes in from Scott on tuesday and installed them thursday and yesterday. The install went as smooth as it could go with those damn wastegate bolts and microwrenching, but it probably took a total of 5 hrs from start to finish on jack stands out in the parking lot.
The fit and finish of this kit is awesome. I had no problems getting anything to mount in place and let me tell you...the 5 hr wastegate removal, shouldn't take more than 30 minutes anymore. Now i'm not scared to have to remove the tranny again
Now since it is installed, HOLY F*CK it sounds awesome
I cannot keep my foot off the gas, its just that rediculous. The video doesn't even do it justice at all. I planned on getting some outside of car footage today, but since it is raining I figured I would give you what I got and give you a follow-up vid of outside the car. The video is before and after with the kit installed in the car, windows half way down.
Please RIGHT-CLICK and SAVE-AS!!! http://mp-racing.net/wastegate_preview.wmv
And now for some pictures (higher resolution pics can be seen at http://mp-racing.net/gallery/Wastegatedump) (just click on the picture again to get full view)







The fit and finish of this kit is awesome. I had no problems getting anything to mount in place and let me tell you...the 5 hr wastegate removal, shouldn't take more than 30 minutes anymore. Now i'm not scared to have to remove the tranny again
Now since it is installed, HOLY F*CK it sounds awesome
Please RIGHT-CLICK and SAVE-AS!!! http://mp-racing.net/wastegate_preview.wmv
And now for some pictures (higher resolution pics can be seen at http://mp-racing.net/gallery/Wastegatedump) (just click on the picture again to get full view)







Hey MP...sounds good!
In addition to wrapping your 02 sensor wires, you might consider extending those 02 wires and relocating them all together.
Can't wait to hear your car in person again!
In addition to wrapping your 02 sensor wires, you might consider extending those 02 wires and relocating them all together.

Can't wait to hear your car in person again!
Thread Starter
Registered User
iTrader: (12)
Joined: Jul 2004
Posts: 2,311
Likes: 0
From: Raleigh, NC
Originally Posted by Sharif@Forged
Hey MP...sounds good!
In addition to wrapping your 02 sensor wires, you might consider extending those 02 wires and relocating them all together.
Can't wait to hear your car in person again!
In addition to wrapping your 02 sensor wires, you might consider extending those 02 wires and relocating them all together.

Can't wait to hear your car in person again!

Originally Posted by Jaki
What does the butt dyno say?
looks good mp. ya i went to a Z meet today here, and had a good time throttling everyone with my dumps, hahaha. it gets addicting. you did a pretty good job of capturing it on the vid too. nothing like in person though, lol.
Last edited by overZealous1; Feb 11, 2006 at 03:06 PM.
Trending Topics
Originally Posted by 002-M-P
Yeah thats a good idea, they are kinda right in the line of fire, lol. As soon as those wheels get here, I'll take a venture down to charlotte maybe put it on the dyno and see what the dump tubes did to my power
Butt dyno def says response after the w/g's open is a little bit more smooth and faster. Obviously there is no difference any lower in the rpm band though.
Butt dyno def says response after the w/g's open is a little bit more smooth and faster. Obviously there is no difference any lower in the rpm band though.
If you can't hear them in person, you really have no idea. Thumbs up on getting these to the market overzealous1. I have had mine for awhile and waiting for others to join. It is an addicting loud. You have to love dumping on people!
Originally Posted by t32gzz
I have had mine for awhile and waiting for others to join. It is an addicting loud. You have to love dumping on people!
I got SGP's dump tubes also. They are scary!
Originally Posted by G352NV
Fug!! Need more cash flow!!! Man your making some great stuff!
Definately nothing like it. It helps with the spool time. I don't have my dyno chart yet, but I was hitting full boost at like 2800 rpms. Who needs ball bearing?
Thanks for being the pioneer with these!
Thanks for being the pioneer with these!
We have had alot of trouble with those paper Tial gaskets blowing out.We have them in copper if you want to upgrade.Other then that have fun.I have had my wastegates dumped ever since we put our SFR turbo system on my Z.I love it.It scares old ladies.LOL.


