stillen dual and turbonetics?
Thread Starter
Registered User
iTrader: (3)
Joined: Jun 2003
Posts: 488
Likes: 0
From: vancouver bc canada
Anyone else running this combo? If so what boost are you hitting.
Should i maybe run the stock exhaust over the stillen?
Just a little concerned about overboosting on the reflash.
Thanks.
Freeze
Should i maybe run the stock exhaust over the stillen?
Just a little concerned about overboosting on the reflash.
Thanks.
Freeze
Surprise no turbo guys answered your questions. It is a personal choice, look into the exhausts threads to see what combinations there are. There are many turbonectic guys here so you have many comparisons.
Thread Starter
Registered User
iTrader: (3)
Joined: Jun 2003
Posts: 488
Likes: 0
From: vancouver bc canada
Originally Posted by wilric44
Surprise no turbo guys answered your questions. It is a personal choice, look into the exhausts threads to see what combinations there are. There are many turbonectic guys here so you have many comparisons.
I guess no one else has this setup. Ive research the exhuast threads and could not find any info on the stillen.
I have the stillen exhaust and its fine. I am sure there will not be a problem with the turbonetics kit. Just check to see if adding HF cats will affect the PSI. There is a member here thats is a turbonetics information guru. The Stillen exhaust is very deep and not considerable loud.
All true dual exhausts require a custom fabricated reverse y-pipe to properly mate with the single downpipe design of the Turbonetics setup.
The stillen exhaust will work just fine with the kit once you have the y-pipe fabricated. If you bought the kit in the last six months it includes the wastegate relocation pipe that fixes any overboost problems.
The stillen exhaust will work just fine with the kit once you have the y-pipe fabricated. If you bought the kit in the last six months it includes the wastegate relocation pipe that fixes any overboost problems.
Thread
Thread Starter
Forum
Replies
Last Post




