Performance Factory does TN G35s, too
Thread Starter
Registered User
iTrader: (16)
Joined: Dec 2004
Posts: 870
Likes: 0
From: Clearwater, FL
Originally Posted by DMK
Nice. List of mods?
Thread Starter
Registered User
iTrader: (16)
Joined: Dec 2004
Posts: 870
Likes: 0
From: Clearwater, FL
Originally Posted by diwun67
Nice numbers Ryan 
Can't wait to hit the track once my new clutch is broken in 
BTW what track did you run at and did they make you wear a helmet?
Can't wait to hit the track once my new clutch is broken in BTW what track did you run at and did they make you wear a helmet?
lol!! you guys are funny, just wait till we turn up the boost here soon in your car ryan!!
i know we can get the G to run high 11s with the TN kit.
probably about the same time we go high 10s with AJs car...
i know we can get the G to run high 11s with the TN kit.
probably about the same time we go high 10s with AJs car...
If any of you single turbo guys want a reality check PM me, we'll set something up
AJ, I want another shot with 1100psi bottle pressure and without Jeremy in my car. Also, I didn't want to make excuses but I forgot to have Jeremy bump my utec window switch down to about 3000 rpm's
A few of our runs I was N/A for about 300-400 rpms until the juice kicked in. And as fast as your car is, there is absolutely no room for error
I'll be at Bradenton Thursday if anybody wants some
Jeremy, I think the car is a bit faster. I left an 03' Cobra with exhaust(at least) from a roll... bad! He wouldn't even look over after the defeat
AJ, I want another shot with 1100psi bottle pressure and without Jeremy in my car. Also, I didn't want to make excuses but I forgot to have Jeremy bump my utec window switch down to about 3000 rpm's
A few of our runs I was N/A for about 300-400 rpms until the juice kicked in. And as fast as your car is, there is absolutely no room for error I'll be at Bradenton Thursday if anybody wants some
Jeremy, I think the car is a bit faster. I left an 03' Cobra with exhaust(at least) from a roll... bad! He wouldn't even look over after the defeat
Thread Starter
Registered User
iTrader: (16)
Joined: Dec 2004
Posts: 870
Likes: 0
From: Clearwater, FL
Originally Posted by one350zfan
If any of you single turbo guys want a reality check PM me, we'll set something up
AJ, I want another shot with 1100psi bottle pressure and without Jeremy in my car. Also, I didn't want to make excuses but I forgot to have Jeremy bump my utec window switch down to about 3000 rpm's A few of our runs I was N/A for about 300-400 rpms until the juice kicked in. And as fast as your car is, there is absolutely no room for error
I'll be at Bradenton Thursday if anybody wants some
Jeremy, I think the car is a bit faster. I left an 03' Cobra with exhaust(at least) from a roll... bad! He wouldn't even look over after the defeat
AJ, I want another shot with 1100psi bottle pressure and without Jeremy in my car. Also, I didn't want to make excuses but I forgot to have Jeremy bump my utec window switch down to about 3000 rpm's
A few of our runs I was N/A for about 300-400 rpms until the juice kicked in. And as fast as your car is, there is absolutely no room for error I'll be at Bradenton Thursday if anybody wants some
Jeremy, I think the car is a bit faster. I left an 03' Cobra with exhaust(at least) from a roll... bad! He wouldn't even look over after the defeat
Originally Posted by 98intrigue
I would head out to Bradenton, but will be at ZDayz this weekend. We will have to set something up down the road.
It sounds like a good time but I'm not really into clubs/meets unless they're at the drag strip!
Hope to see y'all out there soon!
i am going to have to get my car running back boosted in the next couple weeks, i will walk you by 10 cars in two gears jay, just to make sure you dont get out of line.... hehehe
AJ said something that is pretty true, you were on a 50/50 mix, so to make it fair, he has to be on a 50/50 mix...
watch out!!
AJ said something that is pretty true, you were on a 50/50 mix, so to make it fair, he has to be on a 50/50 mix...
watch out!!
Originally Posted by Audible Mayhem
i am going to have to get my car running back boosted in the next couple weeks, i will walk you by 10 cars in two gears jay, just to make sure you dont get out of line.... hehehe
AJ said something that is pretty true, you were on a 50/50 mix, so to make it fair, he has to be on a 50/50 mix... watch out!!
AJ said something that is pretty true, you were on a 50/50 mix, so to make it fair, he has to be on a 50/50 mix...
watch out!!
! Look at you guys pickin' on little ol' me
!Jeremy, check the drag forum late Thursday night and see if you helped me any... A new record might be set
!
Thread Starter
Registered User
iTrader: (16)
Joined: Dec 2004
Posts: 870
Likes: 0
From: Clearwater, FL
Thread Starter
Registered User
iTrader: (16)
Joined: Dec 2004
Posts: 870
Likes: 0
From: Clearwater, FL
Originally Posted by diwun67
Sweet vid Ryan What kind of 60' did you get on that run?
What kind of 60' did you get on that run?
Originally Posted by one350zfan
If any of you single turbo guys want a reality check PM me, we'll set something up
AJ, I want another shot with 1100psi bottle pressure and without Jeremy in my car. Also, I didn't want to make excuses but I forgot to have Jeremy bump my utec window switch down to about 3000 rpm's A few of our runs I was N/A for about 300-400 rpms until the juice kicked in. And as fast as your car is, there is absolutely no room for error
I'll be at Bradenton Thursday if anybody wants some
Jeremy, I think the car is a bit faster. I left an 03' Cobra with exhaust(at least) from a roll... bad! He wouldn't even look over after the defeat
AJ, I want another shot with 1100psi bottle pressure and without Jeremy in my car. Also, I didn't want to make excuses but I forgot to have Jeremy bump my utec window switch down to about 3000 rpm's
A few of our runs I was N/A for about 300-400 rpms until the juice kicked in. And as fast as your car is, there is absolutely no room for error I'll be at Bradenton Thursday if anybody wants some
Jeremy, I think the car is a bit faster. I left an 03' Cobra with exhaust(at least) from a roll... bad! He wouldn't even look over after the defeat
Originally Posted by aj_350z
i believe in your sig it say something about 12.07 check mine..11.5 all on 93 octane. thats about 4-5 car lengths. come down to bithlo tomorrow night we can set something up and ill stay on pump gas..