No, I'm not going to turbocharge it... My TT G35.
#21
New Member
Thread Starter
iTrader: (7)
Join Date: Apr 2007
Location: York County, Pennsylvania.
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
Mikes my brother Jesse, I think you got the Utec off of him? Im pretty sure thats who he sold it too. Were the two that used to run around up on the carlise pike with the red and black Z's. Now its just the black one...
But car looks like its coming along good. Might need your help when your back for my shortblock install.
But car looks like its coming along good. Might need your help when your back for my shortblock install.
#27
New Member
Thread Starter
iTrader: (7)
Join Date: Apr 2007
Location: York County, Pennsylvania.
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
The GSX, or the "red car" as I call it, has gone 10.7@144 in the 1/4th with a 7.2@107 1/8th, 2.0 60'.
At a different track I managed a 1.7 60' and went 6.85@113.9 in the 1/8th.
All on 215/45ZR17 Sumitomo HTR+ all season radials and 33psi of boost with E85 as fuel.
I'm looking for about 38psi of boost and high 9 sec passes at 150+ next time out. Then I'll put in the good fuel and turn it up, it will see 45+ psi of boost.
I find it way too easy to talk about the GSX.
At a different track I managed a 1.7 60' and went 6.85@113.9 in the 1/8th.
All on 215/45ZR17 Sumitomo HTR+ all season radials and 33psi of boost with E85 as fuel.
I'm looking for about 38psi of boost and high 9 sec passes at 150+ next time out. Then I'll put in the good fuel and turn it up, it will see 45+ psi of boost.
I find it way too easy to talk about the GSX.
Last edited by BlinkerFluid; 04-14-2009 at 01:08 PM.
#31
Registered User
iTrader: (54)
GSX Thread reminds me of my own 350z build and stories of success followed by fail and rebuild, upgrades, over and over. But Damn!
Nice work re-wiring the entire car is no fun in anyone's book. Glad it all worked out.
Lets hope the G35 Project is much easier. Too much technology to just decide on a whim to re-wire the entire car. Good Luck. Please post your results.
Nice work re-wiring the entire car is no fun in anyone's book. Glad it all worked out.
Lets hope the G35 Project is much easier. Too much technology to just decide on a whim to re-wire the entire car. Good Luck. Please post your results.
#32
New Member
iTrader: (3)
Blinker, first of all, I love the video you posted. It really shows off how quiet and docile your car is until you get on it. That's what I'm going for with mine.
For someone with moderate fixer upper skill, strong work ethic, patience and creativity, how hard would you say this install can be? What if you didn't have access to lift the motor? Would it be even worth tackling?
For someone with moderate fixer upper skill, strong work ethic, patience and creativity, how hard would you say this install can be? What if you didn't have access to lift the motor? Would it be even worth tackling?
#33
New Member
Thread Starter
iTrader: (7)
Join Date: Apr 2007
Location: York County, Pennsylvania.
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
Thanks.
Just installing the APS TT kit?
It wasn't that bad to install with the engine in the car, bolting the turbos to the manifolds made me want to dig my eyes out with a dull rusty spoon though, it was a pain but not impossible. I can't comment on any of the other kits on the market as I haven't installed them.
I would suggest removing the engine, it's much easier not only to put on, but to make sure all the fasteners are properly tightened and lines are routed correctly.
Just installing the APS TT kit?
It wasn't that bad to install with the engine in the car, bolting the turbos to the manifolds made me want to dig my eyes out with a dull rusty spoon though, it was a pain but not impossible. I can't comment on any of the other kits on the market as I haven't installed them.
I would suggest removing the engine, it's much easier not only to put on, but to make sure all the fasteners are properly tightened and lines are routed correctly.