When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not sure if the HKS DLI will fit on the same side as the intake piping? Did you test fit it to clear the plenum and intake? Otherwise simply reversing it to the other side should work just as well. Just a thought.
Not sure if the HKS DLI will fit on the same side as the intake piping? Did you test fit it to clear the plenum and intake? Otherwise simply reversing it to the other side should work just as well. Just a thought.
yea there's plenty of room underneath the manifold (running the ssv so that side completely open). the charge pipe also clears no problem!
If your gonna boost with the SSV make sure you have one of the newer ones or take the one you have and have the welds redone. The welds will crack with boost, I have done it and so have a couple others.
If your gonna boost with the SSV make sure you have one of the newer ones or take the one you have and have the welds redone. The welds will crack with boost, I have done it and so have a couple others.
yea i was looking in there, the welds are pretty slim looking. you suggest rewelding the piece entirely?
If your gonna boost with the SSV make sure you have one of the newer ones or take the one you have and have the welds redone. The welds will crack with boost, I have done it and so have a couple others.
Kinetix actually came out with a brand new version of the SSV. According to their website, it makes 30.5 hp just by bolting it on.
