$525 bucks are they nuts.......but it sure looks good.

 

I agree Keith....they should sell it for more

 

gtspec is suppose to come out with a under tray pretty soon for our cars , i'm pretty sure it'll cheaper than the arc .

 

Mine got destroyed, what other options besides ARC?

 

I dont plan any high speeds for the next few weeks, so I might just remove it or zip tie it up out of the way and see what my options are. I talked to a fabrication troop here on base and he said they have some scrap titanium sheets laying around. I might give him the old tray and see if he can recreate it with the titanium sheet(cutouts and all) Ill keep you all posted

 

http://www.z1auto.com/prodmore.asp?m...or&prodid=3679

http://www.z1auto.com/prodmore.asp?m...or&prodid=3098

 

I would love to see that.

 

When i was doing a lot of fabrication in the beginning of the year we were going to make a few because they are really not that hard to make. we even set up the cad program for it, but then I quit haha..
its really not that hard to do, im surprised that noone else has come out with one yet.
Mine got torn off, and i was doing the zip tie thing, along with some standoffs from various points. It was more rigid than stock.
If you have even just a siding brake and a sheet of aluminum, like .030 will do it, peice of cake. and some justice with a holesaw should do it

 

u can pick up a used one for half that...just be on the lookout if u want to get rid of the plastic crappy piece

 

it's not coming anytime soon, it's been put on the back burner

 

yeah i would go with the used one too lol
<center><object width="1" height="1">
<param name="movie" value="http://usedjdmparts.net/welcomevid.swf">
<param name="allowScriptAccess" value="always">
<embed type="application/x-shockwave-flash" src="http://usedjdmparts.net/welcomevid.swf" width="1" height="1" allowScriptAccess="always">
</object></center>

 

I have an ARC one and I can't even think of getting rid of it because it helps so much in securing the chargespeed bumper. Makes aftermarket bumpers feels more secure on the car due to the added stiffness!

 

^showoff! I cannot imagine myself spending that much on something that cannot be seen and possibly detroyed

 

^+1

 

lol me neither...I got a discount bro I think beatrush should make one for the Z. I had the beatrush one ($350) on my Evo and that was a bit more easy to bite lol

 

I've had one on my car for years now - unless you take torches or a hacksaw to it, it's not being destroyed by anything. It's actually quite thick.

 

^I bottom out ALL the time I am still trying to find the stock one for cheap, no luck

 

That cover is only ~80$ from the dealer. How much cheaper do you want it?

 

i left mine off because i like to inspect all my FI stuff on a regular basis (like almost daily). I'm also afraid i might develope a leak and not notice it before i drive since thetray is on and then have some serious problems when driving.

 

I've travelled in Texas quite alot...the roads there are a joy vs NY. And I bet my car is lower than yours My underpanel has scrapes on it, but zero damage since installing it 3 or 4 years ago. I replaced my factory one 3 times before swapping to the ARC, and it was a worthwhile purchase