My custom self bleeding coolant swirl system.
Thread Starter
Registered User
Joined: Feb 2007
Posts: 908
Likes: 5
From: UK
My custom self bleeding coolant swirl system.
Guys just wanted to share what im running on my car now.
As we all know the VQ is a PITA to bleed the coolant on. I had an over heating problem caused by an air lock (this was caused by coolant over filling the over flow tank when the car was shut off.)
The system I have in now swirls the turbo return line into a little tank that is know the high point in the system, the rad is sealed and a high pressure cap on the swirl tank is fitted.
This system should allow and air/steam locks to bleed them self out to the overflow tank with out displacing all the coolant so the system stays liquid full.
here a few pic's and a little diagram.
The system runs a sealed rad cap of a new R35 GT-R.
Thanks.
As we all know the VQ is a PITA to bleed the coolant on. I had an over heating problem caused by an air lock (this was caused by coolant over filling the over flow tank when the car was shut off.)
The system I have in now swirls the turbo return line into a little tank that is know the high point in the system, the rad is sealed and a high pressure cap on the swirl tank is fitted.
This system should allow and air/steam locks to bleed them self out to the overflow tank with out displacing all the coolant so the system stays liquid full.
here a few pic's and a little diagram.
The system runs a sealed rad cap of a new R35 GT-R.
Thanks.
Last edited by djtimodj; Oct 9, 2010 at 10:33 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Gruppe-S
Body Interior
13
May 16, 2016 10:42 PM
