Notices

FS: Turbonetics kit cheap

 
Old 05-25-2017, 05:52 AM
  #1  
kbowen4
Registered User
Thread Starter
 
kbowen4's Avatar
 
Join Date: Aug 2015
Location: ne ohio
Posts: 32
Likes: 0
Received 2 Likes on 2 Posts
Default Turbonetics kit cheap

Well my turbo feed line ended up getting cut and my turbo lost oil pressure. Since i built my engine this winter i decided its time to go bigger so my turbonetics kit ( with a bad turbo) is for sale. The housings are good but the center section is no good. These can be purchased from turbonetics brand new for 700. I was going to buy the turbo replacement parts before selling but this way the buyer gets to have a guaranteed brand new center section from Turbonetics.
Included is
Bov
wastegate(open dump)
Intercooler
Hot side piping
All piping for intercooler
All vband clamps
hose clamps for intercooler piping
The turbo housings
Air filter



You will need a new turbo feed line and and a way to plum the turbo return line in to the oil pan.

More pictures to come, ive been spreading gravel this week but should get a chance this weekend to pull the rest of the kit off of the car.

Asking $900

Feel free to call or txt 330twoseventwo sevenseven 98 with questions

Thank you,
Keith


kbowen4 is offline  
The following users liked this post:
iideadeyeii (05-25-2017)
Old 05-25-2017, 08:42 AM
  #2  
kbowen4
Registered User
Thread Starter
 
kbowen4's Avatar
 
Join Date: Aug 2015
Location: ne ohio
Posts: 32
Likes: 0
Received 2 Likes on 2 Posts
Default

located in Northeast Ohio
kbowen4 is offline  
The following users liked this post:
iideadeyeii (05-25-2017)
Old 05-25-2017, 09:03 AM
  #3  
iideadeyeii
New Member
iTrader: (6)
 
iideadeyeii's Avatar
 
Join Date: Nov 2011
Location: Lawtown
Posts: 3,870
Received 441 Likes on 357 Posts
Default

Wow, an F/S thread on this website that is actually a good deal
iideadeyeii is offline  
Old 05-25-2017, 02:00 PM
  #4  
kbowen4
Registered User
Thread Starter
 
kbowen4's Avatar
 
Join Date: Aug 2015
Location: ne ohio
Posts: 32
Likes: 0
Received 2 Likes on 2 Posts
Default


kbowen4 is offline  
Old 05-25-2017, 02:06 PM
  #5  
kbowen4
Registered User
Thread Starter
 
kbowen4's Avatar
 
Join Date: Aug 2015
Location: ne ohio
Posts: 32
Likes: 0
Received 2 Likes on 2 Posts
Default Other notes

There is a bung welded onto the down pipe for a wideband, u could use it or would need a $4 plug for it, you will need a small hose to go from the intake manifold to the bov valve. There are also two hose clamps missing. All of the v-bands are there (5 in total). One of the smaller v-bands has one of the clamping pieces broken oof but if you put it on the pipe first it works fine.

these are just a few things I noticed as I was taking it apart today just want to be very straight forward about the sale
kbowen4 is offline  
 


Thread Tools
Search this Thread

All times are GMT -8. The time now is 09:44 PM.