Ok.. here is my dilema...I love my Mag Blue SF's but they arent aggressive enough for me (+28 +23)... I was looking into going with something more aggressive... or should i just pick up some 10mm Kics spacers for the SF's and drop the offsets to (+18 +13)??? The lip on the SF's are good enough for me so that isnt a problem... Opinions??

Setup
- 19x9.5 +28 & 19x10.5 +23
- 255/35 & 275/35
- Z H-Techs with Springmount mod in the rear.

 

If you like your wheels now, then just get some spacers. I don't know about 10mm, but whatever floats your boat.

I saw some 19x11 wheels the other day. Some Jlines I think? Damn, those things were wiiiiiiiiide.

 

I love my wheels too... if not 10mm then what?

 

Keep the rims. They look hot.

You could add spacers, but I think they look fine.

 

I think they great as is but if you go w/10mm spacer do you plan on changing the studs too? When I used a 7mm spacer that barely gave me 5 full turns on the lugs, kinda scary and you are FI so thats way more power than I was pullin.

 

Get some spacers to see how that satisfies your aggressiveNiSS urge...do +15 though

 

Yes you will want to change your studs as well with 10mm.

IMO if you like your wheels there is no reason to take the loss just to upgrade the offsets. Go with the spacers.

 

hahahaha...thanks will...

 

nasty carr..lovin it.

 

Keep the rims, they're sexy

 

I say keep the rims and do the spacers! Will you have any rubbing issues? I had rubbing issues with my Sevas on my car since I was dropped but had my fenders rolled to fix that.

 

Keep the wheels

 

Keep them. I think most would!

 

just add some spacers.

i'm slapping some 15mm's on my front 9.5 +24 works soon.

you'll probably need to run more a tad bit more negative camber in the rear to make a +13 work. the +18 in the front shouldn't be a problem.

 

Well im going to keep them... just picked up some 10mm Project kics spacers... i will be slappin them on tonight... they will drop the rears to a +15... now i just got to get a set for the front to drop them down to a +18... Thanks guys!

 

why didn't you just pick up two sets at once?

 

Do they make 3-5mm spacers? I've heard some concerns about vibrations, would that happen with such a small spacer? Who makes a good one for Sevas rims on a G35 sedan?

Thanks.

 

yeh, they make 3 and 5mm spacers. try ichiba/h&r.

http://optionimports.com/ns-50205-a056.html

http://optionimports.com/1065662.html

 

I picked them up from a buddy that had bought a set and he didnt use them... hince the reason why i got them at lunch time today...

 

Thank you, sir.