I had my car dynoed to today at Forged Performance and this is how I did. Let me know me know what you think.

 

Uhhhhh.... Whiskey Tango Foxtrot.

 

looks good, nice curve...

 

 

I am getting dizzy.

 

Is that a GPS map?

 

Uhh did your car get lost on the dyno???

 

ok, so its got some scribble on it.

looks like 253 whp and just under 208 on the tq. Wheres the tq at? what gear was the run done in?

nice hp curve, love how it doesnt drop off near the top and stays level.

 

 

Thanks for the comments everyone, the car was acting like a baby on the dyno. Maybe Sharif will chim in, and explain some of this info.

 

im lost with this dyno chart, as was said the TQ is weak. Que pasa? Maybey the dyno readings differ and translate to diff numbers so that we can get a better idea of what these numbers would be on other dynos. The hp seems okay but the tq whoa isnt that less then stock.

 

Hi everyone. Matt's car gave us a bear of time trying to find a solid tach signal. It just refused to cooperate, and the scattered graphing is a result of that. Unlike most dynos, the DynoDynamics does not use any type of RPM extrapolation, so it needs a PERFECT tach signal for accuracy. When you get a scattered signal, you end up with the funky chart posted.

The smooth chart, was done using road speed to estimate RPM. The peak number will be the same, but road speed tends to shift the curve due to tire deformation, and other variables. It also doesnt accurately measure trq when using with road speed.

And FYI, there was no trq posted on the graph..just WHP, AFR, and RPM.


But 250+whp on our load reading dyno is pretty impressive for his mods. I didnt do any tuning on the car...this was straight factory ECU. Figure another 10% to estimate a typical DynoJet number.

 

Thanks for the post Sharif, also let me know if you find a used F-Con .

 

nice for the revup, man cant wait to see what u pull off tuned. I figured the tq was that low that u didnt post it thats why i comments lmao but...cant wait to get the accurate reading man >This fuzzy math sounds familar jk

 

I didn't realize that "Etch-A-Sketch" had developed their own Dyno software.... SWEET!!!

Nice base HP for the Revup though. If you're going to make another run after some mods I would just remind you to shake up the dyno screen to clear it.

 

Thanks for the comments everyone, hopefully next time I post my dyno chart I will have a FCON or UTEC with a tune.

 

 

What mods were done to the REVUP?

 

GEEZ I understand why all the guys here say SEARCH!!!!! Even when people give a list of mods in their sig others think they are stock or ask "hey what mods do you have"

LOL

 

but, your mods in your signature are VAGUE! we dont know what parts you have. Crawford makes a otn of na z parts! JWT drivetrain mod of a popcharger and what do you have from tuboxs, not a utec so then what?

see what i mean, look at my sig and you can tell me my mod list.