Dual Intake?
Trending Topics
Registered User
Joined: Jan 2007
Posts: 16
Likes: 0
From: Tampa
As they always say, you can do anything with money. Without doing any research in it, but using basic mechanical & ECU knowledge....
I would say yes....few things that you will need to swap a dual intake from a 2007 to a 03-06
-Hood
-Upper / lower intake plenium
-Both throttle bodies with associated eletronics
-wire harness
-ECU
I would say yes....few things that you will need to swap a dual intake from a 2007 to a 03-06
-Hood
-Upper / lower intake plenium
-Both throttle bodies with associated eletronics
-wire harness
-ECU
Registered User
Joined: Jun 2005
Posts: 200
Likes: 1
From: Ikea desk chair
Originally Posted by davidv
If you can figure out how to get two intakes to the throttle body in the back of the motor than yes.
I know you have a picture of this somewhere
Ooooooo......How bout fabricatin this mother to fit. 15 ponies per filter is word on the street.
Last edited by zz350zz; Jan 14, 2007 at 07:47 PM.
Originally Posted by icedout589
I know you have a picture of this somewhere
Ooooooo......How bout fabricatin this mother to fit. 15 ponies per filter is word on the street.
Ooooooo......How bout fabricatin this mother to fit. 15 ponies per filter is word on the street.
LOL. WTF is that b.s.? Something they sell on ebay?
Guest
Posts: n/a
^ that actually works well on like a corvette. i had Y style intake by K&N upfront on my C5. it produced somewhere between 16-20HP for like $300
but thats a whole different story than what were are discussing here
but thats a whole different story than what were are discussing here
Last edited by **; Jan 14, 2007 at 08:32 PM.
The hiss would be awesome!
Registered User
Joined: Jun 2005
Posts: 200
Likes: 1
From: Ikea desk chair
Originally Posted by MC
^ that actually works well on like a corvette. i had Y style intake by K&N upfront on my C5. it produced somewhere between 16-20HP for like $300
but thats a whole different story than what were are discussing here
but thats a whole different story than what were are discussing here
That one pictured is for a dodge ram....so i'm assuming then if it worked for the vette....it might work for the ram too. But yes the Z....not so sure about
+1 on the dual popchargers.....dayum I can't wait for sound clips
Guest
Posts: n/a
Originally Posted by icedout589
That one pictured is for a dodge ram....so i'm assuming then if it worked for the vette....it might work for the ram too. But yes the Z....not so sure about
yeah the one i had was just like this
http://www.westcoastcorvette.com/p-3...tem-black.aspx
Thread
Thread Starter
Forum
Replies
Last Post
