HR Driver's Side Cat. Removal Help. (Installing ART Pipes)
Thread Starter
Registered User
iTrader: (7)
Joined: Jan 2011
Posts: 2,724
Likes: 2
From: Portland OR
Gah, sorry i didn't see this earlier, Duckee 
Tony's advice was bob-on, but i wouldn't recommend PB blaster to people with actual problematic nuts/bolts anymore.
I will add, that a 6 sided socket is a must, but i will also add that if you've already tried a bunch of things, then you need to use Kroil, it's far more effective than anything off the shelf round here.
If i'd seen this at the time, you could have borrowed the can and hopefully gotten it all removed.
Glad you have it sorted though.
Tony's advice was bob-on, but i wouldn't recommend PB blaster to people with actual problematic nuts/bolts anymore.
I will add, that a 6 sided socket is a must, but i will also add that if you've already tried a bunch of things, then you need to use Kroil, it's far more effective than anything off the shelf round here.
If i'd seen this at the time, you could have borrowed the can and hopefully gotten it all removed.
Glad you have it sorted though.
Thanks for the help again everyone. Much appreciated.
for some reason the sensors are possibly different from right to left part number wise.
code P2A03 was the code thrown, which can be mutiple reasons. hopefully mine does not come back.
New Member
Joined: Jan 2012
Posts: 195
Likes: 0
From: Florida
I appreciate the reply nonetheless. If I ever run into anything with my car I'll get in contact with you as I do not have any Z friends locally.
Yeah about a day after. I decided to swap the o2 sensor on the cat from right to left and reset the code again. I drove a good 500 miles so far over the weeekend and it has yet to come back on.
Thanks for the help again everyone. Much appreciated.
for some reason the sensors are possibly different from right to left part number wise.
code P2A03 was the code thrown, which can be mutiple reasons. hopefully mine does not come back.
Yeah about a day after. I decided to swap the o2 sensor on the cat from right to left and reset the code again. I drove a good 500 miles so far over the weeekend and it has yet to come back on.
Thanks for the help again everyone. Much appreciated.
for some reason the sensors are possibly different from right to left part number wise.
code P2A03 was the code thrown, which can be mutiple reasons. hopefully mine does not come back.
Thread
Thread Starter
Forum
Replies
Last Post
FromGtoZ
Intake Exhaust
2
Sep 20, 2015 03:41 PM
